Recent content by nole16k

I was answering his questions, post #8. http://www.caraudio.com/forum/showpost.php?p=2594477&postcount=8

Ported is louder than sealed pretty much all the time (unless someone really screws up a ported box).

12 ga will work fine.

ported

There is definitely a noticeable difference.

http://www.crutchfieldadvisor.com/S-IaJy4SLVmQ9/learningcenter/car/amplifiers_movie.html Thay may help. If you can't find an existing spot to run the power wire through the firewall, then it's ok to drill through the it. Just make sure you use a grommet to protect the wire from rubbing...

http://infinitysystems.com/caraudio/product.aspx?ProdId='REF7541A'&Ser=REF&Cat=AMP Get that amp for now and when you get all six speakers, add this amp to the setup: http://infinitysystems.com/caraudio/product.aspx?ProdId='REF7521A'&Ser=REF&Cat=AMP That'll be plenty of power...

I know that if you have more than two amps it's necessary to wire the remote to a relay and it's still a safe bet to do it with one or two amps; but if you have more than two components or amps that need a turn-on signal, can you just wire two of them to the head unit's remote output and the...

http://www.monstronix.com/product_info.php/products_id/3284?osCsid=3f9bf5500c3409ce9aa38dba16efc341

Man, I thought the amp would have a good enough protection against this crap.

I checked both the remote and power w/a DMM and both read 12V. Unfortunately, we gave up for tonight and will go around to local audio shops tomorrow and see if we can get some advice or get them to finish the install for us. Man, I don't think I've ever been so pissed in my life. I'm just...

Ok, bad news. I ran a jumper from power input on amp w/out disconnecting neg. battery terminal, but as soon as I did, the amp immediately turned on and I disconnected the wire real fast. Then I disconnected neg. battery, screwed the jumper wire down, reconnected battery and absolutely nothing...

Thanks for the quick reply. I soldered the remote wire onto the yellow wire that connects to the factory wiring harness. I looked at installdr.com guides to see which color the ignition wire was, and it said yellow for this vehicle. However, I'm only getting 6V. Lemme go run a jumper really...

Hey guys. I just wired my friend's sub amp, but I have a slight problem with the power. The power LED doesn't stay on constantly, but it will flash whenever the bass hits hard on a song. Everything seems fine but the remote wire. I tested the voltage on the power wire and it was +12V, but...

Lol, man you gotta get a new amp.