Recent content by ninjaff21

Yep i used the RCA converter on the stock lines and now it works! its weird it only works with one RCA in. i have to send my rovers amp to the left side for the sub to start working. are my wires still not wired correctly?

Right they were empty this converter i have changes them to RCA im using high line imputs on a low line signal coming from my rovers amp

i have a line converter a scosche LOC-80

i have a solid ground and power from the battery i have a cigar lighter in the trunk area of my rover and im going to wire 12volt off that

Im going to try what he said ill get back with you guys later tonight to tell you how it turns out

i used seperate power and ground could it be since its high level imput on a low level signal its converting it so low no sound comes out?

Could it also be that my ground isn't good enough? It uses a high line in. Could it be that since where i tapped into the wires its post stock amp and its already a bass signal and the JBL is converting a bass signal to a lower bass signal to where there is nothing at all? basically as if that...

It had a speaker wire harness that you use to tap into existing speaker lines. so i tapped into existing subwoofer lines for the stock subs now they don't work because i disconnected them and replaced them with the JBL basically. so i did not have to use RCA cables. could i have wired that...

i mean i kinda figured it wouldn't be extremely loud but its not producing anything the airflow is minimal. i checked out my friends 100watt bazooka and it puts out more then this does. maybe i didn't do something right? could i improve it with a new hu and using rcas instead? even in this...

skip to 2:00 thats what its supposed to be like mine isn't anything like that.

2002 Land Rover Discovery with Alpine Wiring Information I followed this wiring guide. anyways the wires and there colors are in the back of the truck i have a 2002 land rover discovery. i have everything wired together correctly i believe. my problem is the sub isn't loud and is not producing...