Recent content by n8dgr84

I just put these into Qlogic qforms in my '98 Dakota. These speakers sing beautifully at the >80hz hpf. Lots of kick on the drum and sweet highs..can't say enough! Love 'em for the money..also a great amp for cheap is the Cadence TXA- Series ( I have the 1502 but feel 3002 is better suited...

Guys, I just got everything installed. The Q-Logic kicks are not closed off just kinda sittin there screwed to the underpanels so I'm not getting much KICK but even so it's more than the Infinity 652i I had in the doors. The sound I get from these speakers and amp is amazing. Its separation...

It's a 4gb kingston flash drive. I hope that's what you were asking.. I adjusted the gain down on my amp and that helped a bit but it still adds some noise to the line.

Hey, I have the aforementioned HU and the cable seems to be generating some sort of static/clicking noise. The CD player of the same songs has no noise. I ripped the CD at 250-330kbs so I dont think that should be a problem. Is there anything I can do to help shield or reduce this?

I have the 675 as well..Whats wrong with using a 2.5" laptop hard drive? Which model HD did you have success with?

Hey all, I bought two of these HU. When I try to adjust the gain on the treble from 8k-12k hz it seems as if both frequencies are adjusted, rather than each being adjusted individually. IE I set 8k to -1 and the 12k goes to -1 automatically. Anyone have any tips?

Ok just as an update... I ordered the following: -PG RSD 65CS from ebay. - Cadence 1502 $99 ebay. Seems like a good amp for CHEAP. - 35 sq ft. of eDead V1SE...hopefully have some left over to do the doors on my 240sx. Now I suppose I should upgrade the 8 gauge amp kit to a 4 or 2 gauge as...

Ok just as an update... I ordered the following: -PG RSD 65CS from ebay. - Cadence 1502 $99 ebay. Seems like a good amp for CHEAP. - 35 sq ft. of eDead V1SE...hopefully have some left over to do the doors on my 240sx. Now I suppose I should upgrade the 8 gauge amp kit to a 4 or 2 gauge as...

Thanks guys, you make me feel better about spending money on the kicks. lol... I will update this thread once I get everything installed. Probably another couple weeks..

Excellent advice and research, thank you for sharing genxx. Unfortunately, I already purchased the Q-Forms before I found this website. I think I will amp the RSD with a 50x2 Orion that I have in my 240SX (getting engine rebuilt) and see how it sounds from there. Is it possible to mount the...

Gary S, thank you very much for your advice. I am powering the ID8 with a JBL 300.1 that I got from Cardomain for $70! Unfortunately it is not a multi-channel. I read up on the 3-way system you described...essentially run the components off the HU >120hz and the midbass off an external amp...

Thanks for your advice. I read up on the PG RSD and they aren't very efficient at 88dB. Most users seem to push them with over 100w RMS while I am probably going to cross them at 120hz and only run 20w RMS/channel. Do I have any alternatives? What about the kickpanels?

Hey everyone, I ordered the 6.5" 'C' kickpanels from Q Logic for my '98 Dakota Club Cab and am wondering what would be a good, efficient component set for under $150? I would like to use the Clarion 675usb deck amp for simplicity and cost sake(hence efficient speaker). I dont listen to music...