Recent content by MeAtWork

Sorry can't help u but I have a problem which seems somelike the same. My pioneer headunit gives 4v preout but my amp can only handle 2v because it's from '94. I have to put my gain down or put it on fixed. Else the sub starts bouncing back and forward while there is no bass which makes a...

Alpine headunit is better I would say but most of the time more expensive so if you have the money and think it's worth it I should go for the Alpine headunit. I've got a pioneer headunit but that has more to do with a defect last unit (also pioneer within 1 1/2 year) and to little cash for a...

If I remember correct the amp is from '94 and the headunit from 2 years ago. So you say the headunit gives 4v thru the preout and the amp can handle only 2v. So I have to put it on fixed or look if at some point with variable it works correct and then comparise the sound level. Thanx on the...

The way the wires are connected is taken from the instruction manual so I guess this is wright. I noticed that if I put the variable switch into fixed (stable was wrong in the drawing) the problem is gone. Also if I put it in variable but turn the gain down the problem is also gone, if I then...

Anyone knows the rms watts of these amps?? Alpine 3544 I know it's 2*150W rms but bridged it is 1*630 max or rms? Alpine 3542 I know it's 2*60W rms but bridged ?? Oh yeh, anyone knows if the 3544 is 2 Ohm stable? Having some problem with my sub, see my post about my RF sub. Thanx...

I have yellow Koni shocks with Koni springs and it drives good, really low too. Replace the stock shocks and get new springs, I would suggest Koni's. Think it is no more then 1/2 a day work to replace front and back. Good luck

I have a subwoofer problem: Problem is that the subwoofer keeps bouncing back and forward even if there is no bass, this creates a chopper like sound and is really irritating and I think not good for the sub as well. Also if the bass comes the sub will go on with the bouncing and will try to...