Recent content by McGuyver

It sounds great! I'm runnin around of power. (800x2 to subs and 100x4 to doors) I thinkin of adding another sub for evne more UMPH!

Ihave the Audiobahn A2200hct pushin 2 Audiobahn 1008q's and the shop that did the inst said it was better than the Directed 1100d amp in his opinion

i got 4 ga from batt to dist and 8 to amps

Thanks guys! I went with a 250a wafer fuse powered by what ever the conversion van Company installed for an alternator and a red top Optima with 960cca

This is Audiobahns reply:If your subs are the AW1008Q subs they are dual 2ohm voice coils. If each sub is wired in parallel they are 1ohm each so the amp will be running in 1ohm stereo if you have 1sub per channel. Running the amp at that load requires quite a bit of power. The max amperage draw...

The manual says idle it (th a2200hct amp) 1.4amps. Which is betterglass or wafer fuses?

According to th manual @ 2ohms stereo is 400x2 and at 2ohms mono is 800x1. If that's what u mean.

Another question which is better for 2 subs: 400x2 stereo or 800x1 mono

even if the subs r wired @ 2ohms and the a2200hct is is wired stereo/

4ga from battery and 8ga to amps

My System: Alpine cda9807 head unit,Adiobahn 4004t 4ch amp also an A2200hct 2ch amp. The 400t is running the door spkrs and the a2200hct is pushing2 Audiobahn 1008q subs in 2 separate Audiobahn bass tubes. My Question is : How can I figure out the current draw of the system? I'd like to know...