Recent content by mahosky85

Just got done wiring it for an 8ohm load internally. Sounds great! Thanks so much for all your guys help!!!

So if i wire each coil to its own channel i will get ______? watts or if i internally wire it to 8 ohms i will get 380 watts?

Can't i just wire it to one channel, and forget the mono deal? BTW Anyone think it's worth getting my Concept CC-D1200 amp fixed and if so how much would that cost, and i wouldn't know where to take it to get fixed?

Well i'm not really sure what the sub is i guess. When i previously said 2 ohm i just was reading what it said on the box that the sub and enclosure came in... I guess the actually sub could be 4 ohm, wired to 2 ohm? My DMM is this below, i took the speakers wires out and turned the setting to...

I checked the impedance off the box and got a ready of 2 ohms....?

I took all the screws out of the front but it doesnt exactly seem to wanna "pop" out, and i'm to scared to really pry on anything... any ideas?

I'm happy with everything as long as you guys think what i have will work and work good together when hooked up right with your much needed assistance =]

Just figured out that i only really spent 575 ish.... And i would like to keep my current equipment if you guys think it will be alright?

Send me a link to a cart with everything you think i would need to be better than my current stuff... Minus the kicker wiring kit, dash kit, and wiring harness.

Listen the kicker gear is not sub par and the head unit was free with the enclosure / sub.... The sony amp was the only one in the area i could find close to being big enough for my sub without spending $300.... I do have an older concept amp that i tried to first hook up , the power light came...

Sooo... now what lol Get a diff amp?

Alright just read to enclosure paperwork and it says it's either wired for a 2 or 4 ohm load, but where the speaker wire terminals are it says 2 ohm. Just got done setting to 40v

The only one of those thats on the amp is the low pass filter, which is set to on ( 80Hz)

Its a 2001 Mustang

All i've done is hook up the power / ground wire, fuse box, rca cables to amp, remote wire, head unit, and ran speaker wire to the sub so far...   ---------- Post added at 07:45 PM ---------- Previous post was at 07:45 PM ----------   yeah the sub came pre-installed in the enclosure...