Recent content by logik05se

tried both of them individually and still herd it.....funny thing i noticed is that when I let the sub rip, and go high volume for a minute or so, the noise would go away and then slowly come back. my installer nor rockford knows what it is.

is there any easy fix for this besides sending it in for warranty service that will leave me without a woofer for 2 months. The friggin thing is 2 hours old this makes no sense.

i really dont know...it will happen from very low volume to high volume. Its definatly 100% coming from the sub because when I turn the gain completly down the sound is no longer herd. The sub still hits really hard though, so i doubt its blown. I wouldnt really know if its a blown voice...

crap...nobody huh.

Sup fellas As i stated in my first post I had a 2000 peak, 1000 watt rms fosgate power hx2 blow within 20 minutes on my mtx thunder 81000D amp. I gave the installer the benifit of the doubt because its an old sub. Today I received my rockford fosgate t210d4 10inch sub. 1600 peak, 800 rms. I...

ya...what i dont understand is peak power on the woofer that blew was 2000 watts, with 1000 watt rms. Can a woofer go bad from sitting for years and years with no use?

will do...any advice one where they should be set at? Im using this with 2005 honda accord ex-l stock H/U.

oh sorry...yea the t2 is what i picked up not the p2.

you sure? heres the link directly from rockfords site. http://www.rockfordfosgate.com/products/product_details.asp?cat_id=4&series_id=32&family_id=13&item_id=91847&locale=en_US&p_status=

well at this point, i dont need him anymore. I will be receiving the new sub tomorow so all i have to do is wire it up and slap it in. Is there anything that I should look out for before I put the volume up on this new sub? I really dont wanna blow it out again, although this one is now...

well i really didnt continue, i only noticed this within the first 15 minutes of trying the thing out...within 20 minutes the thing was blown. Im still skeptical about this whole "wired for stereo thing"...its a monoblock amp, can that have anything to do with it?

whats the face about? Im not to good with car stereos thats why I posted the question. Not for a sarcasism. I build race cars, not show cars.

This was a "professional"...it was a shop around the block from my job.

I recently had an old box and amp I had laying around installed in the accord. The amp is an old model mtx thunder 81000D amp, its a 1000 watt x 1 channel or 500 x 2. The sub was a 10 inch rockford fosgate power hx-2 with 2000 peak power and a 1000 watt rms. After it was installed it sounded...