Recent content by LexusRob

I was using the CD player and I had everything at zero when I was doing my test. According to the specs the D3 puts out a maximum voltage of 1.7 Vrms. I will have to do some playing with the SLA to see at what level it starts to clip with the CD player, and Ipod.

I don't know what your talking about. The preamp signal is right in spec and my d3 is in bypass.

That is my biggest complain for this headunit, but you get what you pay for. I'm want to get an Audiocontrol 6xs for my system to boost the preamp voltage, and have a better x-over then what pioneer has to offer.

Well today I was setting my amplifier up in my car. To do this I was using a Tektronic O-scope from work. I found that when playing my Test CD(Autosound 2000) at 40Hz 0dB, everything at flat and at 0 on the D3. The preamps don't clip at full volume (40). The D3 puts out right around 4.1 V pk-pk...

Would a Phase Controller like the old Precision power FSC-221 correct a poorly positioned sub? Scenario: I have a sub in my car with the box in the back of the trunk flush to the back seat with the sub facing forward firing into the vehicle. Usually in this situation the sub is not nearly as...

What you smoked was a MOSFET transistor. You maybe able to get one at radioshack, if not go to mouser.com and get the same model that you killed.