Recent content by Jr1993

Went to Walmart and picked up an RCA to headphone Jack for 4 bucks and the amp Was fine so I headed straight to the salvage yard dart pull the RCU Is Got it for 20 bucks Everything is working great now just gonna have to get a new amp eventually because there's Pioneer gets HOT!

Well I just called a junkyard its 20 bucks for the rcu but I will try to find an rca to headphone jack and try that first. I'll post how it all goes when the problem is isolated and all fixed. I was thinking real hard about this and the only difference I could come up with between how it was...

Tried just removing the loc and that didn't help do you guys think I might have damaged the outputs on The factory amp?

Ran out of daylight today I was on the lake later than expected I will.definitly take the loc out tomorrow hook it all up how it originally was and let yall know what happens. Shouldn't matter if I Just use the new speaker wires that I ran though right? the ones that are already hooked up to...

That is how the chain goes so.the right side is doing the same thing now gonna unhook everything and just try running it off the factory amp again tonight I'll let you know how it goes. I will also try to r ecord another video and post it here so.you can hear it the video I have is to large to post.

So don't know what timezone your in but I live in mineesota so maybe I could just call and explain the situation through Facebook messenger or some other videochat service later tonight. Im just very frustrated with this while proccess. It's the 7th system that I've installed and I've never had...

The wires were cut short off the rcu so I had to take the pins out and solder a wire on that was long.ebough to work with.

Yes the distortion switched sides I did have to repin to harness is there a chance I have it wrong?

I switched the rca Jack's around and the left side worked flawless...is it the outputs on The factory outputs then? I tried new wire different speakers separate amps also tried different rca Jack's on the loc and each attempt the left outputs off the rcu messed up even tried hooking.up a speaker...

I switched the rca Jack's around and the left side worked flawless...is it the outputs on The factory outputs then? I tried new wire different speakers separate amps also tried different rca Jack's on the loc and each attempt the left outputs off the rcu messed up even tried hooking.up a speaker...

So the aftermarket amp is still in but only running the right side of the car. I tried a different speaker wire same problem was still occurring. Could the output wire from the rcu cause this problem? I'm unsure because like I said it's crystal clear at a low volume and as soon as it hits around...

Yea I tried the speaker unmounted. The mach factory amplifier is actually an rcu so can't really bypass it. the facrory headunit in the dash is just a remote control. the tuner and inner working of the radio is all in the mach rcu amp. Have the speaker wires running to the loc I'll send a...

Yea I tried that also.tried putting the factory speaker and it sounded the same

I installed 4 door speaker and the right channel works fine. the front door and rear deck and front tweeter on 5he right sound great, however the left channel gets completely distorted if when I turn the volume past about 3 out of 18 so it sounds great on the left at a very low volume no...