Recent content by Jearod

just built this one... nothing like reading the manual. http://www.kicker.com/05/tech-support/manuals/manuals/04SL7%20Tech%20Brief.pdf

i sure hope to hell you aren't putting those in that ranger...there is no legroom in my friends w/ 2 10's much less 12's. And you can forget about a ported box, much less a sealed...just no room...All of this is true only if you're puttin it in that ranger, if not, ignore my rude comments Jearod

Sounds like a good opportunity to port your box now. Jearod

well seeing how I am from Oklahoma, I would use some southern engineering in this case...I would cut a 3 inch hole and see how it goes from there, if it's too small either sand, file, or cut the hole slightly bigger until the pvc fits in pretty secure. Jearod

Jmac, it looks like you're the man of the week with your curved ports :p Jearod

Here's roughly what I have to go by Jmac... I only took a few pics. Since then I have sealed it with silicone and applied a coat of spray on bedliner. Also, I have cut one of the sub holes out and put a spare tornado 10 in and bumbed it a little to see if there were any leaks. None to my...

He means 20" long ports 4" in diameter I believe

hmm... Well I would rather have a common chamber, but i'm not too sure how a 5 inch opening is going to look. I think I'll leave it a sealed box until I can see what the type R's sound like. I bought them about a week ago but the prick still hasn't shipped them, says he will tuesday, so I'll...

TruKolors all u need is a different color...

tweets that's ghetto

Squeeeezed in the Middle that's insane...too insane

You will pound yourself retarded either way with four of those. Sincerely, Owner of 1 L7 12

Hah, if you're talking about a slanted box like so, I believe you take from the top of the slant in a straight line to the bottom, and creat a second rectangle, like so: You then find the area of (1) then find the area of rectangle (2) and divide by two. Then simply add them together. I could...

.......anyone?

Alright, that got me confused...lets see if I get it. I can port it using a single port, 5" in diameter, and run it from either side to the very center of the box...? I didn't quite understand the curve thing in your diagram..And if this is correct, what dimension should I use if I am making a...