Recent content by Iloveweed1864

You should post more info about the sub such as brand model and power handling.

37.5^2 it is than.

Ok thank you bbeljefe . I'm going to redesign my box for 2.5 cubes net with around 33in^2 of port area.

So a volume of 2.5 cubes after displacement is good? Because I'm confused as to whether I'm supposed to use the gross volume (before displacement) or should I be shooting for 2.5 cubes net? Thanks for your help people of caraudio.com

Its kinda hard to tell but its 2.51 cubes after displacement and tuned to 34.51 hz with 15.54in^2 per foot for a total of 39.00in^2

I see.. So would this be better?

Ok thank you Dbeez, so after displacement of the bracing and woofer and port , etc it should be 2.5cubes? I'm going to play around with those numbers

So should I use a bigger enclosure? Because I was told by Tantric Sounds to use 2.25cubes with 33" of port area at 22" long and that would put me into the low 30's but in Torres I get 43.3hz. Is that to high or i'm I just tripping?

Yea I was told 33 by Tantric but with torres I cannot get it lower than something stupid like 44hz and thats with 50" of port. I dont know what Im doing wrong. Should I make the box bigger it self or how would I get a bigger port area and still be in the low 30's?

Thanx man

Here is a top down shot.

Would this be good for a Tantric HDD 12? I want it to go nice and low with authority, but still be able to play quick drum beats like death metal. I listen to rap and deathmetal if that helps with the freq response. Vehicle is a 2001 Chevy Cavalier Z24 coupe Amp is going to be a 2500-3000w...

Looking for DC LVL 4 Motor any one have any?