Recent content by Hemanshs85

Nevermind, I wired them into the Bose amp sub outs and now the gain isn't an issue but when I turned the LPF back up I still got the feedback. Subs sound much better wired to the Bose sub outs instead of the back speakers.

Okay I rewired the inputs and still had the issue but I think it was because I had the input set as RCA. When I changed it to wired it fixed it. The only issue now if when I try to set my gains with a dmm the voltage only gets to about 26 and I need it at 34.4. 1200 watt amp at 1 ohm should be...

Well I found a fix for now. I had my LPF turned almost all the way up (200hz) so I turned it down to around 80-90hz and now it's filtering out the awful noise. I don't completely understand how the settings all effect each other but could this be harmful? I reset my gains after doing this and...

Hi! I recently installed my first system and everything is working great except for one little issue. I have a 2009 GMC Sierra w/ Bose, AQ1200D, a PAC SOEM-t line output converter, and 2 Skar VVX 10's. The truck doesn't have an easily accessible fuse/wire that turns on with ignition so I got...

Alright thanks! If anyone else has some insight or guidance I would be glad to hear it!

Could you upload the pics or message them to me please?

So you think I should separate them into two chambers and then port it at the back of the box with the bottom and back as common walls on both sides? Torres shows I can go 4x3x18 on each side and get 32.57. There wouldn't be any bends on either side.

I'm going to start building my first box soon and I found a design on another site that I think will work. I have an AQ1200 and 2 Skar VVX Series 10s If someone with more experience could confirm that there aren't any big errors it would be awesome! My NNBS Ported Sub Enclosure Build - Chevy...

Is this amp still available?

Would this get the job done? SOUNDQUEST STINGER SQK0 1/0 GA CCA AMP INSTALLATION WIRING KIT W/ RCA'S | eBay And how important is the big 3? Is it a must or could I wait and do it later on after I've recovered from all this stuff I'm buying xD

Yeah I saw how expensive that stuff is lol. I do have a DMM so that's not a problem. Does 1/0 go up very often used in the quantities that I'll need it? And are there any brands I should be aware of? Haven't read much into the wiring side of things

Did some reading and it looks like I'm going to need 0 gauge wire I guess. I have the stock 145 alt. Will this support the amp and my truck reliably?

Thanks! What modifications should I make to my design to accommodate 10s? I haven't bought the subs yet, all I've ordered is an AQ2200 after a long discussion on another thread. I ended up deciding to get the Alpine SWR 12 in exchange for a higher quality amp than I originally planned to...

I think I'm probably gonna get the alpines, they seem more flexible for the type of enclosure I'm hoping to make. What gauge of wire and stuff do I need for the amp? I have the stock receiver for 2010 gmc Sierra with Bose so I'll probably have to get a converter from speaker level to RCA too right?

Right now they're both the same price, alpines might be cheaper with free shipping. The alpines said theyre rated up to 1000 rms and the OAs are at 600 but I read they could be ran at 800-900 daily. Wouldn't the alpines put out more sound because they can take more watts? I haven't been able to...