Recent content by headtrnr

i can get my hands on a fi ssd 10" for about 100 bucks but the thing is ,it is dual 2 ohm sub, and my amp will put out 500 @ 4 ohm or 1200 @ 1 ohm can it handle the 1200 rms gains set proper and have a bass knob to control it in a sealed box .8 cf

blew 3 of them each getting 120 rms ported

what if you inverted the sub so the vent was outside?

figured out the problem the graphic eq was at 0 all across the board on the head unit has to questions avatar came from a lincoln vs cadiallac website i used it when i had my lincoln

with my install now that i have set up i have no bass, not none at all but barely noticable. when i first got the truck the stock system had a little boom. i'm thinking of running a new set up is there anything u guys can suggest that will give me more bass then what i dont have at all

if i have 2 10's in a downfire box (sealed) and my xmax is 16mm should the sub be 1.5" off the floor or should the lowest part of the box be 1.5" off the ground for the air to move around??

just like the topic says i don't care for price just sugggest what u know

what if i use the outputs on the expansion module??

is there a way to tell if my outputs are fried on the back of the deck my camera output on my receiver isn't working and the camera doesnt show up on av1 or av2 either??

anyone ever see a 15 under the seats of a pick up i know i can fit a 12 but i wanna try and see if i can get a 15 under there??

what if i wanted one that is around 450-500 would i be looking for one that can do 700-800@ 2 ohms

can anybody give me suggestions on an amp dont wanna break the bank thanks

these will be going under my rear seat in my truck my space is limited so here is the problem do i go 2 sealed (in same box) or 1 ported on each side of the rear seat. they will get about 120 rms for now and getting a new amp 200 rms each later the sealed will be .6-.65^f total same chamber or...

yeah but the .9 design has no pic

2 6.5's ED 7kv2