Recent content by fordman86

OK that's what I thought thanks.

I bought the Memphis16-PRX5.550 and have a question it has a input selector switch that has 2,4,5. From what I get from the manual it put it on how many inputs you are running. I using the stock head unit and with line out adapters and have only for rca's to it so I would put it on four correct...

Well tried the one good sub and it made noise at least the amp works. Time for new subs any advice on a good medium budget 8" sub.

OK finally pulled enclosure one sub 6.5 and the other .2 with a sticky cone or something. When you push down on the cone it stays down until you push it back up. Could I hook up the one and see if I get sound.

Don't know what they are. All I know is there mtx thunder something. I'm going to pull enclosure out and check each sub.

Checked wires I pulled off amp and get .3 ohms so going to pull enclosure and check each one.

Should I check each sub or can I just check the wires going to the enclosure. It's one of those plastic molded ones mtx made back in the day for the f150's. What should the resistance be.

Should I hook up a speaker or am I missing something do I need rca's to the amp.

Everything was working fine was playing radio on my way to work and all of a sudden got a high pitch squeal and then the amp started smoking so pulled over and disconnected the negative wire didn't want to catch truck on fire.

OK 15 years ago bought a mtx 5400x 5 channel amp hooked it up to my stock head unit and power a pair of mtx 8's. So been a while since I did any of this it finally burned up so I bought a Memphis 5 channel hooked it up just like the mtx but now have no power to the subs. Any ideas did the mtx...