Recent content by fanzyboy234

The thing is they were both reading 2 ohm but after i hooked them to.the.amp.and it went into protect mode, it stopped reading right

I wired to 8 too and.its reading the same. And my wire is 14 gauge. And no it was not hooked up to the amp

Trust me ive rewired them 4 time. + to + - to- + to + voltmeter side, - to - voltmeter side.

But even when i parallel them to 2 ohms they won't read at 2 ohms. I used a voltmeter. They should read around (1.8) AND they read (0.2) which i do not understand at all.

The subs are in 2 separate boxes so idk how i would wire.it to get 4 ohms

But a 4 ohm dvc sub can.only be.wire at 8 or 2 ohms

My amp is a boss ph 2.800. It puts out 800 watts per channel wired for a sub wired at 2 ohms. The subs are 600 rms 1100 max so therefore my amp shouldnt have blow up my subs. And now my second sub is doing the same thing.

Can i get a decent answer. I'm sorry i can't afford to drop a grand on a sound system. If you can't help don't comment.

Ok well i just got my new boss ph 2.800 1600 watt max amp and i hooked my dvc 4 ohm subs up that are wired at 2 ohms and it keeps putting my amp into protection mode. So i took a voltmeter and tested my subs. One of them reads about 2 ohms (1.8) and the other reads (0.2) so i took all the...