Recent content by dnd

Ok I can do that. Thanks

Got 8" baffles installed. Got SunDown X-8,s mounted have almost 1/2" clearance from magnets so will not be reusing beveled tops, instead will seal with plywood cutouts.

Photo is of 1 beveled top in place and 1 off and upside down

No, your not getting it. Go to foxacousticsllc and look at there boxes and you will answer your own question that mclerico83 already answered

The only thing being done here is reducing the sub cut out from a 10" sub to an 8" subwoofer. Also by doubling up the baffle will stiffen the box where the sub mounts. Its really no big deal

Took the beveled tops off to trace the cutout to find center point for the new baffles

http://i1205.photobucket.com/albums/bb421/dnd31/IMG_09051.jpg http://i1205.photobucket.com/albums/bb421/dnd31/IMG_09061.jpg?t=1490219321 Received box today, dry fitted in truck, with 3/4" baffles X-8's will fit. Ordered 2 X-8 D4'S and SCV-2000D. Got to make baffels next

Thamks for the heads up they should fit according to fox i needed a 5/8" seat lift for the box i went with 2 1/2 so if i have to make a baffle hopefully it works out thanks for another option with the CT Meso 8"

Fox box shipped today,probably see late next week. pretty sure X-8's are going to fit so advice on power for these 2 X-8D4. Ive come up with so far: Ampere AA-2000.1 Sundown SVC-2000 Bstock Twisted 1.8K Synergy 15.1 WFO Budget is 500 any one of these over the other or better suggestions welcome

Being a downfire box it could also hurt me. what is the front and rear clearances on an X8 woofer?

Talked to sundown today, there suggestion was 2 SA-10's with a SAE-1500 amp. SA-10 ported 1.0-1.25cuft 35htz 6" mounting depth X-8's ported .75-1.0 cuft 35htz 7" mounting depth i know the SA-10 s will fit but unsure if i can fit the X's. Fox box shows 2.0cu/ft tuned to 36htz 7.5 "...

which 8's would you go with

so i could reduce the cutout to 8's ported or seal the ports and use the enclosure sealed with 10's. which would hit harder, chest pounding kick drums, musicly

Power to be purchased to match subs. Big 3 already done   ---------- Post added at 02:32 PM ---------- Previous post was at 02:31 PM ----------   cutouts are for 10" subs

Truck rear seat lifted 2 1/2" GM-XC-210-V-08 2008-17 GM EXT CAB / DOUBLE CAB 2-10" VENTED SUB BOX AIR VOLUME: 2.0 CUBIC FEET TOTAL DIVIDED: N0 PORT/VENT TUNE FREQUENCY: 36hz MOUNTING HOLE SIZE: 9.125" MOUNTING DEPTH: 7.5" WITH A 6.5" DIAMETER MAGNET BOX FINISH AND COLOR: SPRAY BED LINER...