Recent content by deftones5792

  1. D

    98 Altima system help?

    I figured that 16g wire was too small so I will replace it. What is the min size I should use? Keeping in mind that it is only a 300W max pwr amplifier and one 10" sub. My biggest problem is trying to figure out what to do with that remote wire. I dont know where to hook it up! Also, there...
  2. D

    98 Altima system help?

    Equipment list: Sony Xplod CDX-L410X deck (yeah i know sony sucks but its what I have to work with) Kenwood 300W Max amp: KAC608S JL 10" sub in prefab box I have a power wire to the amp with a fuse/fuseholder near the battery. I used a voltage tester and confirmed that there is power to the...
  3. D

    Speaker installation

    would a two channel with 222RMS wattage ok for those speakers?
  4. D

    Speaker installation

    OK cool thanks. Now what are the specs of the amp I would need to buy for the 6X9s? I want to buy one for as cheap as possible, so what is the lowest I can go without sacrificing a ton of quality? Also how would I install that amp? I am thinking about mounting it to the top of the sub box with...
  5. D

    Speaker installation

    OK so tell me if this works because logically in my head it seems to. If I hook up the speakers to the same contacts as the subwoofers on the amp with a fuse wire on the positive of each speaker, they should work no problem right? Would the amp divert power from the subs to run the speakers or...
  6. D

    Speaker installation

    Wait no, I think I typed that wrong. Basically I had Best Buy install everything. The speakers are hooked into the cd player I believe. The only thing thats on the amp so far as I know is the two 12"subs. I'm no good at this stuff so I basically gave the two sets of speakers, the amp, and the...
  7. D

    Speaker installation

    If I do that, will it damage anything or be too much for the system to handle?
  8. D

    Speaker installation

    its a 1200w 2way with two 12" subs and four speakers attached. Can I splice the two speakers into the other two that hang down into my trunk?
  9. D

    Speaker installation

    Can I splice the wires with the wires going to the other speakers? any ideas?
  10. D

    Speaker installation

    I have an extra pair of 6X9 speakers that I want to put in my trunk. I would like to make small box mounts for them or buy them if they are cheap enough. What materials would I use to make the boxes? Also is there any way to wire the speakers to my amp? I'm not very good at all this electrical...
  11. D

    wiring help

    Thanks a lot! Any idea if its ok to cut the wires to the trunk light and connect them to the other neon tube in the trunk so that the neon tube will be the trunk light rather than the one that already exists?
  12. D

    wiring help

    I just bought two 6" LED tubes to put under my dash. I'm not sure if the kit comes with instructions on installation though. It comes with an on/off switch, mounting hardware, the two tubes, and the 12V adapter. I really dont want to use the adapter because I think it will look lame. How/where...
  13. D

    Newbie help

    I need to install speakers in my 01 civic ex sedan and cant seem to figure out how to remove the back panel and the door panels. The back panel has one of those locks on it for the fold down seats so I dont know what to do to remove the panel. I also cant see any way to get the door panels off...
  14. D

    Civic speaker installation

    Its the sedan. sorry forgot that piece.
  15. D

    Civic speaker installation

    I just bought an 01 civic which has 6.5" rear speakers and I believe the same in the front. I have a couple of questions. I have a pair of 6X9 speakers that I'd really like to use if I can, is there any way to build/buy an adapter plate? And also, will the speaker even fit? I'm going to just buy...
Top