Recent content by dayo808

Hey everyone I'm interested in a soundstream ta1.2000d I'd like to know anybody's thoughts on this amp. Is it worth the 220 or so it costs? Does it sound good Sq wise? Thoughts on other amps that have better sound quality and about the same power specs for around the same money? I'm about...

Ok I turned everything on the lc7 down all the way and turned the acr1 all the way up unplugged it and plugged it back in and voila bass haha. Thanks for the replies. Now just getting my 4 channel dialed in ill be all to the good. I had previously talked with audio control about setting up...

I came across a suggestion to have it all the way up and on another place all the way down. I tried knob all the way up everything powered off unplug and plugged back in. Same thing. It seems my amp just dosent pull or push as much juice with it plugged in. Without it...

Well I finally got everything in and running haven't had much time to tune tho. I got ran off from the big parking lot where I figured I wouldn't bother anyone. I did however notice that when the remote gain knob going to my lc7i is plugged in the bass is quieter than without. Anyone...

I went to a couple stereo shops and found. Some entry level focal and some Memphis 5x7 also I heard the newest kappa thoughts? Anyone

So just buy nice components for the front and nothing for the back? I have some 15s I'm going ported tuned @34. I was wondering about the upper end of my bass with my subs tuned there. This will be my first ported sub setup so I'm going in uncharted territory. Thanks for the input. Now...

Are they in your normal speaker location? Or mounted elsewhere?

So I'm getting closer to finishing my setup in my 09 explorer. Have been wondering about putting mid drivers in the rear doors and components in the front. Or just going with 4 new coaxials. For the coax I have been looking at Fosgate punch series 6x8 or alpine type s. Whatever I do will...

Sorry for the late reply I believe it was 29 inches haven't been able to get back home to my spec sheets

So anybody got any input on this design. Forgot to mention the thickness of the wood is 3/4"

with my amp and a cvr there were places where it just didnt do justice to what i have heard there before one of these is paul revere by the beastie boys im not sure if it was the box being a prefab or my adjustments or the amp or h.u. setting everything by ear

Im interested in these things looking at a sound stream processor heres the link any experience with it or thoughts My head unit only has 2 volt outs and my amp will work with up to 6 volts im hoping by upping the voltage in to it i may get more out of it...

IMAG1076_zpsbuhufnj6.jpg Photo by dayo808 | Photobucket heres a couple pics if i did it right haha outer dimensions are 34 wide 28 deep 17 tall thanks again all p.s. the port is 3 inches tall and is 97 square inches

I have done that and gotten to the point where i just want for somebody to take a look at what i have drawn up, tho i cant figure out how to put the sketchup drawing on here. The box has 97 square inches of port area and just under 6 cu/ft of area if i did my calculations correctly also...

Hey everybody i am in the midst of trying to design my first sub box. Ive had several sets of subs from fosgates to mtx to q power good and bad but i have also always ran a sealed box. With my new subs i want to go a different route id like to build my own slot ported or aero port box. I...