Recent content by DAMONMCHALE

13.6v at the amps with all 0gauge big three upgrade. I'm debating on upgrading the amps or if these will be able to push my subs. 2 - Rocksford t1d410s 2 - Rocksford r500x1ds 1 - Rocksford r250x4

I have an r500x1D and I'm only able to cleanly get about 450w rms anything above that it's fuzzy. Would a higher battery voltage or agm battery solve the fuzziness? I got a certificate that says 634w rms tested/certified.

Ok so on my ocilliscope when I get close to the clip point the wave gets fuzzy at the peaks. Not flat but fuzzy. What does this mean?

Ok figured it out. I had a bad wire on my meter. So I got it tuned with a 0db tone but playing music there is definitely not enough bass. Some songs are loud and others aren't. What db level tones can I use safely?

Group 41 battery fills the tray perfect. 7" x 11.5" is the tray dimensions. I couldn't find a group 41 agm. Why does your response have to be rude? I was never planning to put an agm up front and my response was sent in the middle of my work day so no, at the time I did not measure it. What's...

They don't sell a battery to fit my car. It's a brand new interstate battery. Would it be ok to get an agm as a second and keep the lead acid in the front?

Hi all, I have a system running about 1500watts rms and I'm having major headlight dim and voltage drops to 11.5v on a sub hit. I have the big 3 upgrade done already. Everything is still running on the main battery, would it help adding a second battery? Like a kinetic battery with an isolator...

Yes I can get readings from speaker output on the amp down to 2v but nothing on RCA. Ground on the ring and positive on the pin.

Pico fuse?

Music sounds great how would I have a heady it ground issue?

Volume at 35/35 max ground on outer ring and positive on center pin 1khz tone at 0db multimeter on AC voltage.

I've been using 0db tones and haven't gotten any voltage.

There is no voltage on my rca at max HU volume with a 1khz test tone. I have the multimeter set to a 5v scale so I figure I should se something but there is no voltage readable to me.

So I've been trying to read my rca voltage with my o-scope and I can't get any readings. I've tried multiple meters and still no luck.

Ok my issue now is that I can't read my rca voltage. I've tried for an hour and I can't get any voltage reading.