Recent content by d2freak82

I'm having a hard time choosing, at this point I have 2 Kinetik HC600, and 1 optima for the main car battery. I'm moving my battery to the rear, I can't fit the optima in the spare tire well where I want it... so I need something smaller, I THINK the hc800 would fit, not 100%. Essentially...

no one knows?

oops double post you can delete one of these

Alright this a bit of a weird deal here I'm building, or I should say modifying a box to fit 2 8's. the box looks like this It goes under the seat of my 94 Silverado Ext Cab. I need 1.5-1.75 cubic ft for a ported box on these 8s. This box is .86 per chamber which works out nicely. I took...

Alright this a bit of a weird deal here I'm building, or I should say modifying a box to fit 2 8's. the box looks like this It goes under the seat of my 94 Silverado Ext Cab. I need 1.5-1.75 cubic ft for a ported box on these 8s. This box is .86 per chamber which works out nicely. I took...

it's the 1999 series HCCA 15D (orion), with an HCCA 1200D on it (1200watts rms at 1 ohm, the sub is dual 2ohm). and if I go with the SQ box, which is my plan to begin with, it's 4ft^3, 33hz@8db (I haven't figured out what the 8db is for at the end of that yet.... so if anyone knows might be...

ya I was thinking the back deck with the aero would be the best idea, I found a good place to buy them, and it should be a fairly easy thing to do. The sound should reflect off the back glass nicely I hope.

I drive a 4 door grand am, planning to cut a 15" sub into the back seat, build my box accordingly. I've seen mixed opinions about speaker location and such, but I plan to build at least one set of pods on my doors, should I put a second set of components in, say the back? or another...

lol ya I edited it, it's supposed to be back seat lol

I was thinking of cutting my sub into my back seat, firing it straight into the cabin, my back seat does not fold down, and has a metal support. I figured I could either 1 reinforce it with mdf, and build the rest of the box around that, or just use the metal but I'm sure that would rattle like...

the subs are 1999 hcca 15d, takes 4ft^3, port diam 4", length 14", in a 96 grand am?

should I just find a tuning freq that I want and use winISD to determine the port length? and if so what is a good freq I've heard 37hz

okay well my figures are coming from the 2 4" x 14" 33hz round port, where the surface area of one is 12.56 multiply 2 = 25.02 so I need to make my slot port face equal to that from what I understand, so my plan was to make it 16.67 (5/8 is close) x 1.5" is this correct? and where do I go...

First of all my sub calls for several different enclosures, 1 calls for 2 4" diameter ports, at 14" long, and tuned to 33hz, the other calls for 3 4" x 14" ports at 40hz, I'm not sure which to use for everday listening. Second I've been beating my head against the wall trying to find, and...