Recent content by codycr6

Not that familiar with Audiopipe... what companies are they tied with? Common boards with other amplifiers?

Really like this period of amplifier design... don't have the specs in front of me, have a link to the power at different loads? My current build I have the option of 2 or .5 ohms mono... Any idea of effeciency?

Was originally running a single Image Dynamics ID12V2 in Dual 2ohm in my HHR, now want to add a second. This gives me either a single 2 or .5 ohm load. I've had around 600 on the single sub, seems to take it okay but may be running out of mechanical excursion at low frequencies in the 1.25 cubes...

I haven't used it in a while... going to see what some drivers look like in larger enclosures with large vents tuned higher for StreetBeat. Everything I have done have been daily drivers, though some were fairly loud, they were all tuned low. I think the VW Bug is going to like a high tune...

I have WINISD, but I have had it for years and the driver database isn't that current. Is there anyone on here with an updated database I can import? Or have they updated it somewhere? Been out of serious car audio for a while, now looking at doing something for StreetBeat 1 or 2 in a VW Bug.

Look for subs with a Qts of between .5 and .7, a below 40Hz, and a nice long x-max. Power handling really isn't that big of a deal as you will still run out of mechanical excursion well before you get to any big power requirements. The above mentioned Dayton IB driver will sound very thick down...

Installed the single 12 in 1.2 cubes this weekend in the back of my HHR on 600RMS to break in and see how it sounded. Very impressive subwoofer, never mind the price! Will shake everything in my HHR, and it is usually a hard vehicle to get driver orientation right to avoid cancellation. Right...

What do they like enclosure wise? Mounting depth?

These are built by image Dynamics, and every spec is an exact match, so if they are not the exact driver, I am sure they are going to be great for $79! Mine did not make it in time for my business trip, it will arrive while I am away, so the report will have to wait until I get back next weekend...

look for decent xmax, a Qts of around .5 to .6, and an Fs. down in the 40Hz range.

I have one on the way for my wife's Mustang... but it will spend a week in my HHR "breaking in" on my Orion 2150GX first while I go on a business trip! If it works out, I will let you guys know soon. Hopefully it will make it Friday, as I am leaving on a company trip Sunday and will be driving 6...

I run four 10's IB in the rear deck with a single 5x7 for rear fill in the middle. Also have a 5x7 in the dash for center channel, and 6.5's in the kick panels. Doesn't take much power to run an IB setup, I have 50 on each 10 and can drive them fairly well. They are lower powered 10's, but the...

It says dual 2 ohm, which you can series for 4 ohms...

Looking for something for my wife's car and saw these: http://www.woofersetc.com/p8144/REFTM122--Image-Dynamics-12"-Dual-2-Ohm-OEM-Tidal-Audio-Subwoofer.htm Was mainly looking at going Phoenix Gold in her car, but these are interesting. Anybody know where to get specs of have experience with...

Do you have a graph of the frequency response in each of the recommended boxes? I am out of town on my laptop and don't have my software with me... may be interested in ordering 4 when I get home. Any idea of shipping for 4 to 38668?