Recent content by carfreak5312

  1. C

    First Fiberglass build!!

  2. C

    First Fiberglass build!!

    One more thing about the port. can i leave that one alone and put pvc pipe like in the two sides. as you see in some of the pics, there is about 10" by 12" piece of mdf on both sides holding the bottom and back in place. thanks sooo much for the help. i would prolly be throwing money down the...
  3. C

    First Fiberglass build!!

    ive used just over a gallon of resin and 2 packs of glass mat. i used one pack of glass cloth. its ALOT easier to go around curves and bends. does it matter what is used as far as fiberglass goes. the mat just gets everywhere.
  4. C

    First Fiberglass build!!

    ok the length is 13", width is 10.5, hight is 2.5
  5. C

    First Fiberglass build!!

    thx, ill add some when i get the chance.
  6. C

    First Fiberglass build!!

    ok. the volume of the box is 7.901 ft^3. i think i did everything right. does this sound totaly wrong or????
  7. C

    First Fiberglass build!!

    ..
  8. C

    First Fiberglass build!!

    i can make the port to the right size, but like i said before, im more into the electrical aspect of the whole deal. can someone help me with the tuning. isn't it hard to do with all of the curves.
  9. C

    First Fiberglass build!!

    ill just close it off prolly. (port). keep in mind that all i did was glass it
  10. C

    First Fiberglass build!!

    this was kinda a low budget build. i had about 560$ to do everything. ive ordered 4 ma audio ma12d4's. 400 rms 800 peak. still need to buy an amp. The box is going in a chevy blazer. (Fits Snug, very snug)lol. i dont really know much about port sizes and all that stuff. im more into the...
  11. C

    First Fiberglass build!!

    Some pics of my first build. learned everything on CA.com. COMMENT!! thanx!! there is dust all over it. will be finished soon.
  12. C

    question about fiberglass enclosure.

    do you think that 1/8" on each side would mess up the mounting of the sub. mine are 11 1/4"
  13. C

    question about fiberglass enclosure.

    i got may rings cut with an inner diameter of 11 1/4". im getting 4 ma audio compitition 12"s.(120XE) i think!! and on maaudio's website, that speaker's mounting diameter is 11.4". my thinking was that if it was 11.5", that would be 11 1/2" so i figured i could always remove alot easier than...
  14. C

    question about fiberglass enclosure.

    this might be a newb question, but i am going to have someone cut the wooden rings for the subs in my fiberglass box im making, what is the inner diameter of a 12" sub.
  15. C

    question about fiberglass enclosure.

    One more question, what would be a good resin to use? Ive been looking around and ive seen some boat resin that is really cheap( $38) for a gallon and some well over $100. Does it matter if it has wax in it?
See more
Top
Menu
What's new
Forum list