Recent content by Bun-Bun

  1. B

    oscillating buzzing over bluetooth Pioneer 80PRS

    Still does it. Has to be the head unit. Local dealer doesn't want to replace it.
  2. B

    oscillating buzzing over bluetooth Pioneer 80PRS

    People talking to me on the phone complain of a buzzing sound. I have borrowed my gf's phone and confirmed this myself. It's fine on my end but for the person on the other end there is a oscillating buzzing sound. I have tried connecting my gf's phone to the headunit and calling my phone. Noise...
  3. B

    WTB: Pioneer DEH-80PRS

    Shipping is apparently too expensive either way. Don't get it. Had a Alpine PDX100.4 shipped for 1/3 of what this HU is costing. Bought a new one locally. Thread can be closed.
  4. B

    WTB: Pioneer DEH-80PRS

    I am buying.
  5. B

    WTB: Pioneer DEH-80PRS

    To the top. Only accept USPS as shipment (due to shipping cost and brokerage)
  6. B

    WTB: Pioneer DEH-80PRS

    Item Wanted: Pioneer DEH-80PRS Item(s) Description/Condition: Fully operational, Some cosmetic wear acceptable Price: $225 plus shipping to SK/Canada
  7. B

    Help with ground loop issues

    Not even the trunk battery? What is the rationale behind this? When I was building the system I went with mind set that if I completely separate the audio system from the car's electrical that I would eliminate and chance for a ground loop. Everything is connected at the back battery for both...
  8. B

    Recommend a upgrade/replacement to ageing Alpine CDA-9887

    Ok whine issue mostly resolved. And it wasn't the head unit. EMI coming from my sub amp. Now do I go ahead a buy the pioneer anyway? Digital ipod connection, built in auto TA, 5v pre outs... lol
  9. B

    Help with ground loop issues

    Well the noise was significantly reduced after I rerouted the RCA's away from my amp board and put the excess wire behind the back seat instead of underneath the amps. Last night I had the stereo on the entire time and my GF didn't complain once about the whine. So for the time being I am going...
  10. B

    Help with ground loop issues

    The head unit is grounded directly to the trunk battery. Everything stereo related is grounded at the trunk battery. Head unit is powered/grounded by 8 gauge wire. Battery to distro blocks is 1/0 gauage and distro blocks to amps is 4 gauge. Trunk battery to front battery is 1/0 gauge. He...
  11. B

    Help with ground loop issues

    Something in the sub amp you mean? With the sub amp off the sound is clear with no noise. Try grounding at the amp end you mean? There is continuity to the head unit case and RCA ground, so they are grounded. There is 3 ohms resistance between the amp end of the RCA's and the amp ground. Should...
  12. B

    Help with ground loop issues

    I went to a local car installer and we came to this conclusion. The sub amp is radiating EMI into my RCA's (he tells me digital amps are noisy). I had the excess length of RCA coiled up under my amp board right underneath the sub amp. So I took the back seats out and everything out and rerouted...
  13. B

    Help with ground loop issues

    Ok so I have this whine coming from my speakers. Had alternator whine as well but fixed that mostly by going straight to the battery from the HU (was on stock wiring). The whine starts a few seconds after turning on the system, builds up for a bit and then stays a constant but slightly wavering...
  14. B

    Recommend a upgrade/replacement to ageing Alpine CDA-9887

    Ok I ran seperate power and ground to my HU (as can be seen here http://www.caraudio.com/forums/wiring-electrical-installation-help/542667-where-should-i-run-my-power-wires-head-unit.html). A lot of various noises went away and SNR is much better when playing CD's. But the whine is still there...
  15. B

    Where should I run my power wires for the head unit

    Ok well I decided the back battery was the best place. Went ahead and ran the wires. Solved some things (SNR is better when playing CD's). Alternator whine almost non existent. But my noise problems are still here. On with the troubleshooting!
Top