Recent content by BUMP MY RIDE

The higher my lpf cut off frequency(70 - 80hz) the more low end I lose at least with my set up is this normal ? If i cut off lower(40 - 50hz @ 24db) the low end low notes play with way more authority but the punchy bass notes are missing.. Sub = 12 jlw6v2 ported jl spec tuned @ 32 running off...

Anyone??!?!?

I got the eclipse 5425, in the manual it states that loudness adds +10 db boost at 100hz and + 6.5db boost at 10 khz i was wondering if its a big curve cause when i use loudness i get alot more low end that doesnt sound near 100 hz or should i just turn off loudness on the deck and raise the...

Ok i have a external equilizer with a built in sub crossover and sub level i would like to use this to control my bass but the crossover knob just has a start frequency of 30 and end off at 180 and between is just dots i would like to know the general area im cutting off at can i just put the...

How much amps average should a 500 watt rms A/B Mono block amp drawl at a max power. I just want a rough estimate Amp - Total moble Audio T5001

Another thing the subsonic filter is dat way too 10 min and 40 max how can i set this assume about half? i wud like to set it to 25 hz since my box is tuned and 32 hz

well is it anyway to tell what range im playing wid approximently or i gotta turn it till wat sounds right:crap: i find that between 60 and 70 sounds right in my car the problem is when i set it by ear some songs sounds like if i need to raise it or lower it slight grrr.

Most the crossovers on my equipment are not precise meaning u gotta be guessing, its how they are label like my amp crossover lpf has two known points thats 40hz min and 110hz max no other numbers in between so i gotta guess what frequency its at it sucks gotta set by ear:crap: . Is there anyway...

Well i took it out the box and played it free air on a 200 watt amp with some test tones and turn up the volume fairly high and heard the same noise like if its clipping like a buzz. I hook up another sub and heard a similar noise and near the same volume.

Ok check both coils each reads 3.9 ohms wid a lil flucturation so i guess the noise im hearing is probly clipping

i tested the terminals of the two combine coils and get a funny reading flucturating between 1.7 ohms and 2.7 ohms is this normal when i tested a single coil sub i got here im getting a steady 4 ohms no flucturations.

If i take out w6 out the box which jumpers i gotta connect to test each individual coil?

Ok at normal listening levels it plays supurb but if i bump it up too loud a hear something like a high picth buzz on certain notes comming from the woofer it self before i though it was port noise but i block of the port and the noise is comming from the woofer itself i borrowed my friends mtx...

Ok so that means you use it well my old pioneer deck would sound like crap with loudness turn off but it appears to be different on the eclipse.

Ok im still working my way around the features of the unit and but for the loudness feature which most units have, does this hurt the sound quality?I know in some songs it makes the bass sound muddy:crap: and doesnt blend with the music and some songs loudness enhance the way they sound:) so...