Recent content by Buldg7

After some further reading of the manuals for both of these, would it be possible to go from the 80prs in standard mode to go to the H800 in the 5.1ch input config, using Front L&R, Rear L&R, and one of the sub outputs to go to the corresponding inputs on the H800, but also taking the...

Hey Guys, so I've got a bit of a dilemma on my hands. For my custom car audio install, which is almost entirely planned out already and I really don't want to change too much at this stage, I want to use the Alpine PXA-H800 DSP in its 5.1ch mode. The thing is that I want to drive it from a...

So a lot has happened as far as planning in the last two weeks. Well remember how I said I needed to start planning out the mids and highs? Well I have! As well as the four amp racks, since all of the amps are going to be too large to fit underneath the center console. I've decided that space...

AN UPDATE TO THE LAST UPDATE: So in the third paragraph I went into talk about the LEDs, and I've already changed my mind on how I'm going to do this. I am still going to have independent power switches on each of the six zones, and I will have three different color zones, however instead of...

Yet another update. I know it's been a while, but as I'm sure most of you know, life tends to like to get in the way of projects like these. Some good news is that the price of the SSL component subs has gone down, to $12.80 a piece, so now for all 8 it's only going to be $102.40. Due to this...

Just a quick little update, really little this time. I've decided that right from the get-go I'm going to be modifying the center console. I'll be removing the cd holder and replacing it with a panel of some kind, I'm not sure if I'm going to use acrylic or wood or mdf or what, but it's going to...

I reached the max limit for images so here are the other 5:

Alright so an update for you guys. I've measured the space in the back of my Blazer, and done the CAD modeling for the cabs as such. The majority of it is 3/4" MDF, and the rest is 1/4" acrylic. The insides will be painted white to allow better reflection of the RGB LEDs inside, and the outer...