Recent content by BoostenGTP

Every once in awhile i go to the track, last time i went i ran a 13.84

Thanks. heres some more pics.. http://www.cardomain.com/ride/3350838

Copied from my car domain. Performance : -ZZP PCM Tune -ZZP PowerLog -ZZP 3.4 MPS "Modular Pulley System" -ZZP Cold Air Intake -ZZP 180* Tstat -ZZP 3" Downpipe -Ported Rear manifold -ZZP Ported Blower -ZZP 10.3mm Wires -Autolite 104 Plugs -R1 Premium Drilled Slotted Rotors...

UPDATE: I got part of my cluster in, im still waiting on an overlay other than that, its finished. heres finished pics! Some pics taken with domelight on, some without.

I dont know of any Tutorials, i did this all by trial and error myself. Ill see if i cant find a write up or something.

For what its worth, you can do this pretty cheap, its just very time consuming and difficult if you have never done it before.

It is far from plug and play, you have to wire in Resistors with the LEDs to convert them to 12 volts.... and you have to solder them in the right place, its hard as hell to get right the first time, it took me alot of trips back into the car to test the light before putting the switches back...

I got them off ebay. 50 for $11 shipped from Hong Kong, took 2 weeks to get them. But the DIC a red film was just pulled out, its easy to pull out once you get it apart, was a pain to get apart though, you have to solder everything back together, all the leads for the screen and everything, and...

Ive seen them online for my car, but i want custom. As for the red coating, the only thing that needed to be stripped was the DIC *Driver Info Center*, and the Shift indicator by the shifter needs to be stripped, everything else was white light bulbs with red covers.

I soldered in all BLUE LED's in place of the White ones. And the gauge cluster is being custom made right now, a friend of mine is making me a white face reverse glow gauge with carbon fiber trim.

10/11: More blue... And a look through 20% tinted front windows to show how bright it is with the windows up... Im so close to being finished, i have a custom gauge cluster in the mail now on the way, and im trying to find someone who will trade me my red Aeroforce scan gauge...

10/07: I two toned the Heated Seat switch with red and blue, so that when its on, its red on the setting its on. Heres some pics, also took some pics of the HVAC appart if anyone was wondering what they looked like on the inside, was giong to do LED's in that, but when i took it appart and seen...

All Grand Prix's came with all RED interior lights from the factory. Well i wanted something different. I started a project, i have around 20 hours into it so far and im almost finished. I converted all of my switches to Blue LED's with resistors, and i still have a few things to convert but...

yes they would work as long as you get the right HID bulb for them. i have projectors an they are an H1 bulb, not sure if the ones you are looking at are different but mine are the H1's for my low beam projectors in my headlights and projector fogs.

HID's are in all my vehicles, will never own another vehicle without installing them.