Recent content by blackhawk911

is there any way to bypass the HU amp b/c thats like 20 watts x 4 channel which sucks compared to the stocks?

I have 2 stock amps for my speakers, 1 for the front 2 speakers and 1 for the back 2 speakers. (i think there like 100 watts each) If you plugged them back in (i bypassed them to get rid of a crackly sound i was getting through the speakers), will the stock amps and the HU amp combine or...

Its a 96 Infiniti G20, NOT a Ford. Yes I have the factory amps for the speakers like I said, but I dont know if there bypassed with the new wireing harness or not. Im guess that they didnt get bypassed. By my guess I would say that the stock amps are what is making that sound come from the...

Its not floor noise b/c I wasnt moving and the engine wasnt on just on the accessory postion. Could it be a loose or bad ground to do this?

I just installed my new HU today, I pop in a cd to see if it plays. It plays alright but if I put it on mute or put the volume really low I can hear this crackly sound, Its like if you have the volume all the way up on a speaker but no song is coming out you get this crackly sound. Does anyone...

But I also have a wire harness that converts the factory wires to the aftermarket wires that has a remote turn on wire in it. Do I wire all 3 wires together?

Theres a wire on the HU harness called power control (when using the optional power amplifier, connect to its power control terminal). Do I wire it to the remote turn on on the aftermaket amp and the wire harness from the old to new wires?

I am trying to run the power cable for my amp, I have a 96 infiniti G20, I cant seem to find a good way to get the cable to the battery. I took the wheel well off and found the main wireharness but cant find any way to run the cable there. Any suggestions would be great.

thanks that help, oh the subs are 4ohm DVC, but i have 1 other question. How should I wire it, in series or parallel? I would guess parallel to make the subs at 1 ohml cuz the amp at 4 ohm x 1 channel is 450watts but at 1 ohm x 1 channel its 1000 watts. Am I right?

I have 2 10" alpine type S DVC subs, and a Power Acoustik A1000DB amp 1 ohm stable,1 Channel, 450W @ 4 Ohm RMS, 800W @ 2 Ohm RMS, MAX: 1000W. Can someone tell me how to wire this to get the best out of the subs? http://www.millionbuy.com/paka1000db.html thanks

the same thing happend to one of the speakers in my car, the speaker wouldnt do anything. I found out that the voice coil was gone, so like everyone else said its the voice coil.

im sorry that power acoustik is stable at 1 ohm. so with the amp being stable a 1 ohm is this still a good combination with the alpines?

I need an amp that can handle 2 10" alpine type S subs, I would like it to be a mono amp and between $100 - $200 would be great. The subs are 4 ohm dual coil at 300 watts. Im not sure on what to get, I'm getting different answers on what do get and not so maybe some one could help me, that would...

what about this PG http://www.sonicelectronix.com/item_1491.html 2 pairs of inputs, it seems like it would work. But this has 400 watts at 4 ohms and the subs are 300 watts at 4 ohm dose this make a difference?

couldnt I run the 4ohm subs in parallel so that its in 2 ohms now?