Recent content by apbt55

pm'd

But you don't have 8.5 cube, with the max dimensions you mentioned(17x36x29) the most you have is 8.05 cube before displacement. to get 8 cube net tuned to 35hz with 128 in^2 port you will need at least 10.5 cube gross, if you want double baffle and good support probably 10.7. I have an altima...

Though HDC3 came in D1 and D2 for copper coils or D1 for aluminum coils. SDC2.5 comes in D4. If it were D1's would be interested.

What system is in the car, see this is old, how did your 6x9s fit, I had to drill different holes, they were different then the bose 6x9s.

pm'd

I have eveything set the same the only thing I changed was the amp and the gauge of the wire to it The soundstream took 4 gauge. I have the bo tuned to around 38HZ, the subsonic on both amps is/was set to 30hz. And my deck has a dedicated preamp output for sub that has a cross over level I...

So I just switched from a PCA1500d to a AQ2200d, I was surprised with the sound. First I have a 270+ HO alt from DC, a KHC1800 in back and 2 SDC2.5-12's in a ported box. I had my PCA1500d set up with a DMM was reading app 1400 at 1 ohm at 40Hz, I hooked up the AQ2200d and based on the AC...

just sent email

purchased.

pm'd if still available

I searched for box and amp rack ideas in altimas, didn't pay attention to the location, my bad.

do you have the bose system? I have an 04, my JVC has 2-way ipod control. My components are rockfords but they are going soon, can't handle enough, want a little bit louder. the stock has descent bass so if you are changing out speakers seal them and get good mids or add a sub.