Recent content by Andrewme

I rewired it like i had in my drawing. The camera comes on in reverse and when i flip the switch. I had to solder in a 1N4001 diode to keep the reverse lights from coming on when i turn the switch on. Thanks for the help. Next install will be a single 8" sub to help with the bass. Not looking...

I wired it in but had to move the vedio cable to the input in. I may wire it in to the reverse switch to make it easier on my wife. And add the switch for when i tow. Thanks for the help

Will i have to connect it to the reverse input wire at the radio

Would something like that work? put a 1N4001 diode inline to the backup lamp to keep it from turning on when the switch is on? Main reason that I want a switch is becuse I tow dirtbikes and would like to be able to check on them while in tow.

If I wire it like this I should be able to view the camera when in reverse and when I flip the switch. I do have the added ground that unlocks functions such as nav and dvd vedios while in motion. Ill need to install some diodes to keep the reverse light from coming on when I flip the switch...

If i wired the camera and the reverse input on the radio to a switch would it turn on when i flip tje switch?

Could i run a wire from the same reverse switch that i wire the camera to? And where can i tap the reverse to? Do i have to remove the taillight

Got it in and its working. The bluetooth wasnt working and they didnt install the connector that had all of the rca connections so i pulled it out and fixed the Bluetooth. And connected the rca cables and ran the av cable for the backup camera. While i had tge radio out i noticed that they didnt...

Yes. It chimes. The installer said it was something with the bus. Turns out that its the wring harness. I need the c2r-24B. He had one and said he will swap them out for free but now i have to wait till saturday.

I have the pioneer avic 950bh and the pac c2r-gm24 harness

I took it by the sterio shop so they could install everything for me. They couldnt get it to power on. Even ran a new power wite to the harness and nothing. I have to take the factory radio back tomorrow for them to test it.

Thanks. But I have little faith in most shops. Been burned too many times in the past by misinformation. I've found that the GMOS-08 is a great adaptor but I think it will be too much for my needs since I have no onstar and no factory sub. thanks for the quick reply though.

Hello, Im wanting to install a Clarion NX602 in my Equinox. It does not have onstar or the factory sub. What wiring harness will I need to connect it to my factory harness. looking to make it as easy as possible and would like to switch it back to stock if needed so I done want to cut into...