Recent content by acdcrocks0323

  1. A

    3-way system Problem

    Pardon my ignorance, but why is it a bad idea? The HU has low and high pass filters and I can adjust the fader so the woofers and tweeters blend well. Is there anything wrong with that until I have a different amp? Besides the fact that the HU is only pushing 18 watts.
  2. A

    3-way system Problem

    I sort of figured that out through meddling with it. I think until my girl can get an amp, I'll just run it from the head unit and just bypass the monsoon amp.
  3. A

    3-way system Problem

    I figured hundreds of views would bring a relevant answer. It's too bad you don't know.... Cheers
  4. A

    3-way system Problem

    Nobody has a possible solution?
  5. A

    3-way system Problem

    Hi guys, My girlfriend's 2006 Hyundai Santa Fe w/ Monsoon sound system (after market HU installed) had a farty bass sound out of the passenger side woofer. I figured the midwoofer was ripped or just plain bad so I picked up some replacement 6.5 speakers (Silver Flutes) . I assumed it was a 2...
  6. A

    Sub lacking above 50hz

    Ok so I looked up the "DD box" The DD Box | DD Audio and the chart of guidlines is the same that the SQ website provides for its subs Box Sizes and Tuning . That is pretty much exactly what kind of specs that I'm using, 2.5 cu ft and that size port. So what you're saying is since its tuned...
  7. A

    Sub lacking above 50hz

    Hi everyone. I purchased a Soubdqubed hds212 about a month ago. I built a vented box tuned to 30 hz and was about 2.5 cu ft which was recommended by WinISD based on its T/S parameters. I've been bumping it for a few weeks trying to get it dialed in and broken in (since I have read that the SQ...
  8. A

    Crescendo CZ series or PWX 6.5 and FT1

    Okay I was just looking for an option that would give me good midbass, and I read all over that the PWXs were beefy and would get me that. I also had my eye on the JBL P660C and the RF T1675-S and maybe the Infinity Kappa 60.9cs. I currently have the Polk DXI650 coax set when they were 40 bucks...
  9. A

    Crescendo CZ series or PWX 6.5 and FT1

    Yeah I figured I could split the front inputs to create 4 "channels" coming from the crossover. Then set the high pass for the tweeter and the low pass for the mid. Finally I could adjust the level of the tweeters and mids on the crossover so they are equal. Am I off base on this assumption...
  10. A

    Crescendo CZ series or PWX 6.5 and FT1

    Hey guys, new on here and car audio in general. I wanted to know what would give me a better sound between the Crescendo CZ components or the dedicated midbass and tweeter with a crossover? I was also wondering if it was possible to run the midbass and tweeter on one channel per side and then...
Top