Recent content by 300spartan

The only thing that hits good is right around tuning. Maybe I’m tripping? Like I was saying in my first post the spl from the old set up with a **** box it was in on 750watts was way louder.

Bump.....

Bump....

Yes it’s a slot port

i thought the same thing. Apparently some box builders are saying this box is tuned to around 38-39hz and it’s around 3.9cubes. I wanted it to specs which would be 3.5 and tuned to 35. With sub displacement. The output of this enclosure isn’t putting out

Yes it’sa single 15.

Right now it’s in this box and dimensions are attached. It’s for my 300 trunk. Running on a rp2k. I previously had a Orion h2d4 15 running on a Memphis 750 in a prefab box that was small and it sounded way more loud than what I have now! max dimensions are 32w by 16 high by 20 deep any help...

I think the port matters. I’m not really sure

It saying 3.7 on that program and that’s without sub displacement. Which is .17cuft

Sub will fire up

Going in a Chrysler 300 with 1600ish rms

Yes you can. But getting both amps to match watts going out and exact frequencies wil be a problem. why do you wanna do that? Not enough power? I’d rather get a more powerful amp then to do what you’re asking

Who is running these and what are you crossing them at? I have mine at 80hz @100w rms but I’m scared to turn it up

Deaf bonce Arnold v2 from d4s

This would be a great start. Note: enclosure will make all the difference. If you want maximum output from this woofer then I would go with a enclosure built to spec. No matter what sub I buy I’ll always build a box to the manufacturer specs for the sub. I hope this helps