HandsomeSteve
CarAudio.com Newbie
Need advice on new stereo wiring.
Can I not use the GM adaptor when using new speaker wires?
I purchased the rp4 gm11 adaptor when I connected this blaupunkt to a 08 saab97x made by GM so I could reuse the saabs speakers, wires an it’s amps.
Now I want to install this blaupunkt Portland 310
This yes it’s cheap but I want NAV an didn’t want to spend a grand on a pioneer.
https://www.amazon.com/gp/product/B0721T83D6/?tag=caraudiocom-20
into my 05 Chevy express 3500 van it does’nt have steering wheel controls or amps. So I’d prefer to just run speaker wires an other required wires from back of the blaupunkt.
Here’s the wireing diagram on the blaupunkt I checked what I think are the required wires.
Since I’m not using a external amp can I bi-amp the front speaker wire w/ the backs?or is bi-amping only for external amps?
Also confused on speaker inputs or is this just for the rp4gm11 an using the vehicles amps?
Planning to use just fronts one pair of 3ohm speakers to make up for the lack of external amp.
These https://www.amazon.com/gp/product/B07SCTG9YP/?tag=caraudiocom-20
Thanks for any tips on installing this radio.
Can I not use the GM adaptor when using new speaker wires?
I purchased the rp4 gm11 adaptor when I connected this blaupunkt to a 08 saab97x made by GM so I could reuse the saabs speakers, wires an it’s amps.
Now I want to install this blaupunkt Portland 310
This yes it’s cheap but I want NAV an didn’t want to spend a grand on a pioneer.
https://www.amazon.com/gp/product/B0721T83D6/?tag=caraudiocom-20
into my 05 Chevy express 3500 van it does’nt have steering wheel controls or amps. So I’d prefer to just run speaker wires an other required wires from back of the blaupunkt.
Here’s the wireing diagram on the blaupunkt I checked what I think are the required wires.
Since I’m not using a external amp can I bi-amp the front speaker wire w/ the backs?or is bi-amping only for external amps?
Also confused on speaker inputs or is this just for the rp4gm11 an using the vehicles amps?
Planning to use just fronts one pair of 3ohm speakers to make up for the lack of external amp.
These https://www.amazon.com/gp/product/B07SCTG9YP/?tag=caraudiocom-20
Thanks for any tips on installing this radio.