ThxOne Premium Member
The Boss
I am starting off in pieces and apparently you need several pieces that aren't even part of the build. Ok, so the goal is literally this: Active 2 way front stage with a single 10 subwoofer, no rear speakers, no center channels, DSP, two amplifiers, possibly an aftermarket HU but may stick with the OEM, and because of everyone who joined in on the "40" pages of helpful bashing has convinced me, a second battery.
Prep so far includes:
Have on hand
100ft 12awg red and black speaker wire
100ft 12awg blue and black speaker wire
RF 3Sixty.3 DSP
HP Laptop With REW and 3Sixty.3 software installed
Foam speaker rings
RF 10" Subwoofer
1/0 ground blocks/lugs x 5
4awg to 4awg cable adapter/reducers x 4 (power and ground for both amps)
Stinger ground and power distribution blocks
Stinger 300a circuit breaker (for disconnecting system power quickly)
Black nylon cable straps of various gauges
Rubber grommets of various gauges (up to 1/0awg)
Other misc. supplies
Still needed
The car
The speakers
The sound deadening
The second US Acoustics amp
The custom sub enclosure
The calibrated USB mic (Dayton UMM-6)
The other misc. supplies
Prep so far includes:
Have on hand
100ft 12awg red and black speaker wire
100ft 12awg blue and black speaker wire
RF 3Sixty.3 DSP
HP Laptop With REW and 3Sixty.3 software installed
Foam speaker rings
RF 10" Subwoofer
1/0 ground blocks/lugs x 5
4awg to 4awg cable adapter/reducers x 4 (power and ground for both amps)
Stinger ground and power distribution blocks
Stinger 300a circuit breaker (for disconnecting system power quickly)
Black nylon cable straps of various gauges
Rubber grommets of various gauges (up to 1/0awg)
Other misc. supplies
Still needed
The car
The speakers
The sound deadening
The second US Acoustics amp
The custom sub enclosure
The calibrated USB mic (Dayton UMM-6)
The other misc. supplies