SOLD Cadence Daytona Amps...

RAM_Designs
5,000+ posts

SketchUp Master
21,735
0
Rockwall, TX
Well since these Daytona's won't fit in my dad's car, I'm going to sell them. I used them for about 6 months and never had any issues...they never even got hot.

DCA1000 stats: http://www.cadencestore.com/ProductCart/pc/viewPrd.asp?idcategory=97&idproduct=243

This one got a little beat up being under my driver's seat where the motor for the seat would rub against it occassionally. I'd give it a 7/10 for appearance, and of course 10/10 for performance. I took a couple of close-ups of the scratches. I even dropped it down to .5ohm running 4 RE8's, and it never even broke a sweat.

DCA4100 stats: http://www.cadencestore.com/ProductCart/pc/viewPrd.asp?idcategory=97&idproduct=246

I used this amp to run my active front stage for a while. Ample power for solid midbass and just a solid amp that never gave me any issues. 9/10 appearance, and as always 10/10 performance. It's missing the "C" from the Cadence sticker...not a big deal if it's going out of sight.

amps023.jpg


amps024.jpg


amps025.jpg


amps026.jpg


amps027.jpg


amps028.jpg


amps029.jpg


$200 shipped each, $380 shipped for both...paypal included.

 
bump, I am going, it's tonight.
someone pick up these amps.
Bump.

I'll try and make it, but I need to pick up my fiance on the way back to Denton...and then drive all the way down there for the show. It'll be interesting to see what happens after all that drama on the TBP site. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 
Bump.

I'll try and make it, but I need to pick up my fiance on the way back to Denton...and then drive all the way down there for the show. It'll be interesting to see what happens after all that drama on the TBP site. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
What drama???????hehe:eek:

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

First of all you would want to verify that it works. Next, don't expect to get much out of it. There's a rather finite life expectancy on...
3
1K
Get your Coupon RIGHT NOW!!!🥳🥳🥳 Let’s celebrate the upgrade of Cadence Sound Website! Take this chance to get the 10% OFF coupon which has no...
0
1K
How I would approach it is install your new amplifier and start using it. Install a voltage gauge and if you see your voltage lowering then add...
4
168
Additinally, no need to reference "max" anything as those specs are useless. Most of know how to look at specs for a given speaker, amp, HU, etc...
2
419
Hello all. Used to come on these forum quite a bit. I used to compete in IASCA MECA etc. and placed 1st 2x with this setup. Anyway this is my baby...
0
693

About this thread

RAM_Designs

5,000+ posts
SketchUp Master
Thread starter
RAM_Designs
Joined
Location
Rockwall, TX
Start date
Participants
Who Replied
Replies
53
Views
2,308
Last reply date
Last reply from
RAM_Designs
20240518_170822.jpg

Dylan27

    May 18, 2024
  • 0
  • 0
20240517_190901.jpg

Dylan27

    May 18, 2024
  • 0
  • 0

New threads

Top