amp, 1500bdcp or similar

  • 2
    Participant count
  • Participant list
Thats what I figured which is fine. You are familiar with box rise though, right? RMS ratings of amp are with dummy testers at a certain load without a box.. So say an amp that is rated 2000 RMS at 1 ohm, and amp actually puts out the 2000 RMS. Well, depends on the box but say you only get a box rise of 1.5 ohms while using this 2000 RMS at 1 ohm amp now you would have 1000 RMS to sub(s). So if you have two subs using this example thats 500 RMS to each sub, and if one sub it would see 1000 RMS..

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

No need to bypass the amp. Most use an LOC that takes the full amped signal and turns it into a flat RCA level signal. Here is the newest I have...
2
96
It would also be easy to add an equalizer to have individual rca inputs for all of the channels. A decent one can be had for less than $40...
6
345
  • Locked
NVX MVPA1 Best tiny amp Installed a bunch, but have one pushing a sealed 12 @ 2ohm in my daily beater Can bump it all day long and barely gets...
4
649
Amp
This tested well on youtube - not familiar with the brand but it is a pretty standard china build house amplifier...
5
475

About this thread

corey0928

10+ year member
CarAudio.com Elite
Thread starter
corey0928
Joined
Location
Warren, MI
Start date
Participants
Who Replied
Replies
6
Views
543
Last reply date
Last reply from
corey0928
Screenshot_20240531-022053.png

1aespinoza

    May 31, 2024
  • 0
  • 0
Screenshot_20240524_202505_Samsung Internet.jpg

winkychevelle

    May 24, 2024
  • 0
  • 0

New threads

Top