I know this might have been asked before but I had two 4 ohm Rockford fosgate p1s and my amp blew takin one sub with it, idk how, but I bought a new amp a jl audio j2 500 and my friend gave me a Alpine Type E. Both speakers are 4 ohms but the rockford has a rms or 150 and the alpine is 250...
Hey all,
I just got into the Subwoofer department with a single Alpine SWR 1043D running on an Alpine M500/1. I just ran all the wiring in my car and I'm waiting to build my box.
Here is where I needed a little advice. I want to tune the box to 32-34hz to get a good range of benefits from the...
Item(s) for Sale:
Alpine PDX 1.1000
Item(s) Description/Condition:
Minty fresh. I take really good care of my equipment. There really isn't a scratch on it.
Price:
$335 shipped and insured via UPS. Will come in original box, including manual and all parts that came with it new (except...
Hello I'm new here and have been reading around the forums for a few days. I'm planning on getting 2 12" Alpine type r subs, which will be powered by a kicker dx1000.1, which I already have. I'm still having difficulty finding whether the amp is 1000 watts at 1 ohm or 2 ohms as the website and...
My fuse in the fuse holder keeps blowing everytime I hookup my power wire to battery. Never had this problem until I installed my capacitor and when I hooked it up. But that was when it was new and had no charge. Now that still has charge and its the only reason I can think of. Had a flat tire...
I have Two 12's Alpine Type R's. I had Two Alpine M500's, One powering each sub. One amp blew. So I sold the other amp for now. My question is: I want to get one amp to power both subs. What kind of amp should I get to handle both the subs. How much power...1000 or more?
I am also going to hook...
Item(s) for Sale:
Alpine type R tweets and crossovers
Item(s) Description/Condition:
9 out of 10 missing a few screws in pics but i have them in my car.
Price:
$40+shipping
Shipping and Miscellaneous Item Information:
Item Pictures:
(List pictures in this section, 1st picture...
Item(s) for Sale:
Diamond Hex 600s components
Item(s) Description/Condition:
9.5 out of 10 cosmetic and 10 out 10 mechanical
* 6-1/2" 2-Way Component System
* Power Handling:
o Peak: 340 watts
o RMS: 170 watts
* Hexacone technology: Kevlar/Nomex/Honeycomb sandwich
* Butyl rubber...
ok.. so i have a bit of a problem.. im getting two spl fx1-5500d amp.. and 2 alpine swr-1522d's im getting one extra battery,a kinetick hc 1800, and im doing the big three.. but dont plan on upgrading my alternator until later and i was wondering if that is going to be enough power for these...
Item(s) for Sale:Memphis 16-MC1000D $215.00
Item(s) Description/Condition: I have a near mint condition Memphis 16-MC1000d.2 Small scratches on top plate barely noticable
1 x 300W @ 4 ohms (0.75% THD)
1 x 600W @ 2 ohms (1% THD)
1 x 1100W @ 1 ohm (1.2% THD)
S/N Ratio: >95dB
Freq...
Getting ready to order some components. Going in a Grand Am...decided to go with 2 full range 6x9's in the rear and 6.5 comps in the front. SS's or Alpine's? Read good things about both, but does anybody have any comments about the 2? Also, I was thinking about running a SS Ref 4ch to these, but...
I was wondering which subs would be louder and have better sq in a sealed box in a trunk of a 2000 grand prix running off of a 2k powerbass amp I also have a kenwood 1k amp that can be used
Alpine PDX 4.100 & 1.1000 in Excellent Condition
Specs on the 4.100 can be found HERE, 1.1000 are HERE. Both are in great condition, and were fully tested before they were stored away, but will be inspected prior to shipping. They will come with everything from the...
Alpine PDX 4.100 & 1.1000 in Excellent Condition
Specs on the 4.100 can be found HERE, 1.1000 are HERE. Both are in great condition, and were fully tested before they were stored away, but will be inspected prior to shipping. They will come with everything from the...
Item(s) for Sale:
Alpine IDA-X100 Head unit
FI Q 12" DUAL 2 OHMS
Infinity 475a
Item(s) Description/Condition:
Alpine IDA-X100 works 100%. I got a great deal on a touch screen so i got it and now i have no need for this, I got this brand new a couple yrs ago for $300+
FI Q 12" Dual 2 ohms...
Name? Clint B
Location? Morgantown, WV
Contact info? PM me
Wanted to post this up on the off chance that somebody has an Alpine bluetooth module (KCE-400BT) and/or an Alpine Imprint module (PXA-H100). Since these just go behind the dash, it doesn't really matter if they're brand new or not...
Hey, i have an alpine cda-117e running 2 type r 12" subs from an alpine pdx1.1000, and for the fronts i have a set of pioneer splits up front and type r coaxials in the back doors powered by an alpine pdx-f6.
I have been over my wiring and conections, also the headunit grounds and power. The...
As the title says... looking for a PDX-M12 at a decent price...
will consider other amps pushing around 1200 rms though.
Must be in good working condition...preferably 2008/09 or newer
thanks!
Hey guys, I'm new to this forum and all and am in the process of putting a nice system in my car. I am currently trying to find the best pair of 5.25 inch components around $3-400 for in the doors of my cavalier (terrible car i know) but hey i don't car about the car its the music im into. I've...
So I bought a 2001 Dodge Ram that came with a nice setup. I was troubleshooting some other issues and disconnected the stereo from the truck. When I plugged it back in, nada, no workie! Its a Alpine CDA-9886. I have power all the way to the back of it. I have checked and rechecked every fuse and...
Audio Savings | 2 ALPINE SWR-1242D DUAL 12" SUBWOOFERS+VENTED SUB BOX
if I got those, what is a good amplifier to make these bad boys bump? Im new to this and want to be pushing 500 rms through each. is this possible?
thanks for all feedback.
Ok so im finally upgrading my stock speakers to alpine type r's. I am going to have 5.25 alpine speakers in the front and type r 6x9's in the back. the 5.25 rms at 90 watts and the 6x9 rms at 100 watts. my question is do i need to get a 4 channel amp that RMS's at atleast 100 watts per channel...
HELLO I AM INTERSTED IN BUYING OLDER ALPINE HEADUNITS SUCH AS:
CDM-7854, CDE-7853, CDA-7857
CDM-7861
CDA-7834-7844, 7949
CDA-7863,64
CDA-7872-75
CDA-7965
CDA-7977
CDA-7892-94
CDM-9801-9805
CDA-9807-9827
I WILL BUY NONWORKING & WORKING UNITS. PRICES VARY UPON CONDITIONS. I...
This is a killer setup. I sold my classic car and the new owner didn't want the audio stuff I had in it. All the stuff is about 5 months old and hardly got any use because I didn't drive my classic car very often (only 3,000 miles over the last 6 months), so it's all basically brand new. I...
Just looking to trade for another head unit, the Alpine is great I've just got the itch for something different!
Mechanical 10/10 Cosmetic 8/10
I've got the head unit, face, wire harness, cage, trim ring, face case, remote and the box.
SPECS
Up for trade today is a brand new in box Alpine VPA-B222 I just got in a trade. I really have no use for it at the moment, so its up for trade now
All the specs for this processor are here.
Some of you can flip this for a higher payout : for example...
Some of you may be MECP installers and...
Okay, let me start off by saying I'm not new to the online trading thing (Heatware: NickS) and I found this forum trying to sell this older (competition?) audio setup I have acquired through purchasing this car (1995 GTI VR6).
From what I understand, it's "the cats ***" but I want something...
Okay heres what im looking for:
i really want a nice alpine hu that flips out and goes into a touch screen and has dvd and cd. i would also like nice headrest and visor screens that can be hooked up to a dvd/cd player, PICTURES HELP ALOT!
next what im looking for is 2 to 4 15' HDC3s. I will...
I have a Sealed subbox for 2 10" Subs
going in my ford explorer so dont care about space
Powered By A: Alpine PDX-1.1000 1000 Watt Mono
I want to stay under $500 or atleast around $500.
Im also putting in 4 kicker Ds680's 2-way speakers
Powered By A: 4 channel alpine vpowered amp
What do...
I currently have a 12" Type R ported and tuned to 33 hz and it sounds great, but I am also looking for ways to make things sound better.
Lately, I've come across a few deals for an Eclipse 12" Aluminum and an Eclipse 12" Titanium. I don't mind spending the cash to swap out woofers, but I wanted...
About 4 months ago I purchased an Alpine CDA-105 Head Unit (I love it) Only one thing; I have an 8 gb jump drive I'm using for music, and the unit will ONLY read all of my songs if I have them in folders, with less than 100 per folder. I understand for the average person that is nice, but I...
Ok so my birthday is coming up and i've decided to ask for an upgrade from my current system. My current system is pretty basic, just a diamond d315 2 ohm sub in a ported box(not even sure what the specs on it are lol) powered by a kenwood 8104d mono amp wired to 2 ohms. So it's pushing around...
Alright, So this is what I have...
I have two Alpine Type-X Pro 12 inch subs (set in a custom built box) and I have two Alpine PDX 1.1000 Amps... (one for each sub)
I'm debating on how to wire the subs... I've had it wired a certain way for a while now, and everything been fin, but recently my...