Reply to thread

Message: <blockquote data-quote="nweibley" data-source="post: 382055" data-attributes="member: 551888">From an 1800DT I wouldn't get my hopes up for 1,600watts. With that amp, you can consider yourself very lucky if you can get 1.2kw of clean power out of it.As far as 1600 watts @ 4 Ohms vs 1600 watts @ 1 Ohm... typically, it is cheaper to buy an amp that puts out that kind of power in a low impedance load... a DVC 2 ohm sub like the XXX can present a 1 ohm load and allow a 1 ohm stable amp to 'give it everything it's got' so you are really going to be using the amp at 1 ohm, where as typically at 4 ohms (on a mono amp, at least) you are not running the amp that hard... if that makes ANY sense.</blockquote>

Top