Reply to thread

Message: <blockquote data-quote="audioarsonal" data-source="post: 4225676" data-attributes="member: 576393">Or you could run left to channel 1 right to channel 2 and both to channel three and four.You would then run the channel 1 to the tweeter side of crossover one and bridge channels 3 and 4 and run that to the woofer side of crossover 1.Run channel 2 to the tweeter side of crossover 2 and again channels 3 and 4 to the woofer side of crossover 2.This will give you stereo for the mids and bridged mono for the woofers while still retaning the crossover.I think this would work out best in your situation.</blockquote>

Top