Reply to thread

Message

<blockquote data-quote="SamIam71" data-source="post: 8262255" data-attributes="member: 658526">So, I have 2 pairs of Alpine SPS-610C component sets running on a little alpine 45 x 4 amp, and after only a couple months 3 out of 4 of the tweeters are blown.<a href="http://www.alpine-usa.com/product/view/ktp-445u" target="_blank">Alpine Electronics of America, Inc.</a><a href="http://www.alpine-usa.com/product/view/sps-610c" target="_blank">Alpine Electronics of America, Inc.</a>I am wondering if I could replace the tweeters with a couple pairs of alpine tweets, like these:<a href="http://www.alpine-usa.com/product/view/sps-110tw" target="_blank">Alpine Electronics of America, Inc.</a>or upgrade them with these:<a href="http://www.alpine-usa.com/product/view/spr-10tw" target="_blank">Alpine Electronics of America, Inc.</a>I don&#039;t know how the impedance works with the component sets. The speaker and tweet together are 4 ohms. Not sure if they are 8 ohms to start with, or if the inducer coils and capacitor crossover deals change the impedance. With that, I don&#039;t know if I can just change the tweeter to another model.Or, would moving up to the R series be best:<a href="http://www.alpine-usa.com/product/view/spr-60c" target="_blank">Alpine Electronics of America, Inc.</a>Running this head if it matters :<a href="http://www.alpine-usa.com/product/view/cde-147bt" target="_blank">http://www.alpine-usa.com/product/view/cde-147bt</a>Any suggestions on this, women, or taxes would be greatly appreciated. Thanks</blockquote>

[QUOTE="SamIam71, post: 8262255, member: 658526"] So, I have 2 pairs of Alpine SPS-610C component sets running on a little alpine 45 x 4 amp, and after only a couple months 3 out of 4 of the tweeters are blown. [URL="http://www.alpine-usa.com/product/view/ktp-445u"]Alpine Electronics of America, Inc.[/URL] [URL="http://www.alpine-usa.com/product/view/sps-610c"]Alpine Electronics of America, Inc.[/URL] I am wondering if I could replace the tweeters with a couple pairs of alpine tweets, like these: [URL="http://www.alpine-usa.com/product/view/sps-110tw"]Alpine Electronics of America, Inc.[/URL] or upgrade them with these: [URL="http://www.alpine-usa.com/product/view/spr-10tw"]Alpine Electronics of America, Inc.[/URL] I don't know how the impedance works with the component sets. The speaker and tweet together are 4 ohms. Not sure if they are 8 ohms to start with, or if the inducer coils and capacitor crossover deals change the impedance. With that, I don't know if I can just change the tweeter to another model. Or, would moving up to the R series be best: [URL="http://www.alpine-usa.com/product/view/spr-60c"]Alpine Electronics of America, Inc.[/URL] Running this head if it matters : [URL="http://www.alpine-usa.com/product/view/cde-147bt"]http://www.alpine-usa.com/product/view/cde-147bt[/URL] Any suggestions on this, women, or taxes would be greatly appreciated. Thanks [/QUOTE]

Verification