Reply to thread

Message: <blockquote data-quote="resko1" data-source="post: 7009185" data-attributes="member: 613128">Are you looking for motor spacers or spiders spacers?spider spacers are on ebay through robot underground.If your looking for motor spacers, use 3/4" mdf and coat it with a VERY durable and stiff epoxy. mount it while the epoxy is still "wet" or open so that your alignment is correct. Or else do what i do. Find a piece of 3/4" plastic and cut one out using a jig or scroll saw. I need them quite frequently too since the 3hp bottomless was designed for the ti basket and has that extra 1" flange on the top plate. Or if you can find a VERY good machinist. Have him trim off that flange to make a .5" top plate. You would need an EDM or wire mill in order to do so though. A regular lathe or mill will create rough edges or excess debris.</blockquote>

Top