Reply to thread

Message

<blockquote data-quote="AndonD454" data-source="post: 1226215" data-attributes="member: 560628">i need sq asap. but before i buy anything i need an idea about what i should do. i have a 96 ford explorer.. and it comes with 5x7/6x8 speaker holes right where my knee is when i drive (not exactly optimal imaging).SO, i need to figure something out. i want components. here are my thoughts..mount tweets in the dash, or maybe a pillars.. i dont know i could put them anywhere but i would like to find an easy spot that would still sound good.. and im kinda particular abotu how the tweets sound too..mount up a thin MDF ring for mids in the doors where the stock coaxials came. i would probably use 6 1/2s btu if they wotn fit well im nto opposed to 5 1/4s.. dont need tons of midbass beacuse:i would mount midbass drivers in the kicks in custom enclosures. prolly some eu700s, extremis, xxxs, rli 8, soemthin that works well as a dedicates lower midbass driver.just wondering if this would make for an OK soundstage. im going to have to do a lot of custom work for this so i want it to sound as good as possible. would the tweets sound ok on the dash away from the mids or should i find a way to mount them in the doors at the top of the panels or make custom pods or what?and its cool to have midbass by your feet right, as long as i have a left and right driver?</blockquote>

[QUOTE="AndonD454, post: 1226215, member: 560628"] i need sq asap. but before i buy anything i need an idea about what i should do. i have a 96 ford explorer.. and it comes with 5x7/6x8 speaker holes right where my knee is when i drive (not exactly optimal imaging). SO, i need to figure something out. i want components. here are my thoughts.. mount tweets in the dash, or maybe a pillars.. i dont know i could put them anywhere but i would like to find an easy spot that would still sound good.. and im kinda particular abotu how the tweets sound too.. mount up a thin MDF ring for mids in the doors where the stock coaxials came. i would probably use 6 1/2s btu if they wotn fit well im nto opposed to 5 1/4s.. dont need tons of midbass beacuse: i would mount midbass drivers in the kicks in custom enclosures. prolly some eu700s, extremis, xxxs, rli 8, soemthin that works well as a dedicates lower midbass driver. just wondering if this would make for an OK soundstage. im going to have to do a lot of custom work for this so i want it to sound as good as possible. would the tweets sound ok on the dash away from the mids or should i find a way to mount them in the doors at the top of the panels or make custom pods or what? and its cool to have midbass by your feet right, as long as i have a left and right driver? [/QUOTE]

Verification