Reply to thread

Message

<blockquote data-quote="Anthony Sordi" data-source="post: 3228572" data-attributes="member: 579288">No sorry i must not be clear enough for you. Since running all new wiring into the doors exc takes a lot of time and so does installing the speaker amp.They where not going to be able to do it all in one day which would mean I&#039;d have no stereo for a while. So instead of doing that they opted to hook up the deck and the 4 new speakers with out the amp.Then when i go back in to have the amps and such put in rather then crackin open door pannels exc again they where going to just disconnect the speaker wires from the back of the deck and wire them to the amp.So factory wires would be going from the speakers to teh back of the deck but not connecting to the back of the deck they will then be wired from there to the amp.So stock speaker wires will remain in the truck along with the 16ga scorch twisted wires.Thats my concern i dont know if the differencet running scorch wire the whole way will be enough to bother paying $100 extra to get them to crack open the panels again and wire speakers direct to the amp with the good scorch wire.hope i made it more clear</blockquote>

[QUOTE="Anthony Sordi, post: 3228572, member: 579288"] No sorry i must not be clear enough for you. Since running all new wiring into the doors exc takes a lot of time and so does installing the speaker amp. They where not going to be able to do it all in one day which would mean I'd have no stereo for a while. So instead of doing that they opted to hook up the deck and the 4 new speakers with out the amp. Then when i go back in to have the amps and such put in rather then crackin open door pannels exc again they where going to just disconnect the speaker wires from the back of the deck and wire them to the amp. So factory wires would be going from the speakers to teh back of the deck but not connecting to the back of the deck they will then be wired from there to the amp. So stock speaker wires will remain in the truck along with the 16ga scorch twisted wires. Thats my concern i dont know if the differencet running scorch wire the whole way will be enough to bother paying $100 extra to get them to crack open the panels again and wire speakers direct to the amp with the good scorch wire. hope i made it more clear [/QUOTE]

Verification