Reply to thread

Message: <blockquote data-quote="boomzilla" data-source="post: 4594023" data-attributes="member: 587708"><p>i tested the wires with a dmm. and i get voltage readings, 12.50 from the constant 12v and like 4.20 volts from the switched. the ground wire is what i used to ground the dmm and also check if it was shorted, and its not. so whats the best way to get this working? if i tap into the ignition will it only have power when the ignition is on?</p></blockquote><p></p>

Top