Reply to thread

Message

<blockquote data-quote="Crusader10143" data-source="post: 7814380" data-attributes="member: 643216"><p>Hey all new to the forums here, im having a bit of a prob trying to hook up another amp to my system, as it stand i have a kenwood hu, 2 earthquake magma 12&#039;s, a 500w sony amp powering my highs and a American bass 900w amp pushing my subs, and a 20 farad power acoustic cap. I have an extra kole audio 620w amp i wanna link to the american bass but cant figure out how to get them to link. Their both 2ch, it looks like a wiring mess in my backseat but ive had everything hooked up right so far. i bought a dist block and i got the power from both amps into the 4g holes and my power wire from my cap into the 0g hole. i ran remote wire from amp to amp and now im stumped. i have the american bass amp grounded off the cap and the cap to metal. Do i ground the kole amp to the same ground or separate, also ive read many posts as far as using y splitters so i have 3 sets of them(2 female, 2 male on each end so its more of an x splitter) and not sure how to run them, from what ive seen its hook them into the back of the hu and run the rcas off the amps into them. also i have speaker wire going from the american bass amp into the subs so do i run another set into the subs off the kole as well or no? help needed thanks</p></blockquote><p></p>

[QUOTE="Crusader10143, post: 7814380, member: 643216"] Hey all new to the forums here, im having a bit of a prob trying to hook up another amp to my system, as it stand i have a kenwood hu, 2 earthquake magma 12's, a 500w sony amp powering my highs and a American bass 900w amp pushing my subs, and a 20 farad power acoustic cap. I have an extra kole audio 620w amp i wanna link to the american bass but cant figure out how to get them to link. Their both 2ch, it looks like a wiring mess in my backseat but ive had everything hooked up right so far. i bought a dist block and i got the power from both amps into the 4g holes and my power wire from my cap into the 0g hole. i ran remote wire from amp to amp and now im stumped. i have the american bass amp grounded off the cap and the cap to metal. Do i ground the kole amp to the same ground or separate, also ive read many posts as far as using y splitters so i have 3 sets of them(2 female, 2 male on each end so its more of an x splitter) and not sure how to run them, from what ive seen its hook them into the back of the hu and run the rcas off the amps into them. also i have speaker wire going from the american bass amp into the subs so do i run another set into the subs off the kole as well or no? help needed thanks [/QUOTE]

Verification