Reply to thread

Message: <blockquote data-quote="dominicdevito" data-source="post: 5358876" data-attributes="member: 584029"><p>I have a 6 channel infinity amp which powers my component speakers and a subwoofer.. The subwoofer output on the amplifier is 2 channels.. Here is what I WANT to do.. I have one JL 12w3v2  dual 4 ohm that will be wired in parallel and hooked up to one channel. (2 ohms) and I have a JL 10W0 that I want to hook up to the other channel. single 8 ohm.  This seemed like a good set up since the w3 will be getting more power @ 2 ohms than the w0 @ 8 ohms  since the w3 can obviously handle more power...  Now I havent tried this yet because I dont know if it is ok to run 2 ohms on one channel and then 8 on the other, and I wont do so until i get the ok from a few people who are more educated than I. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif  Thanks I hope someone can help!</p></blockquote><p></p>

Top