Reply to thread

Message: <blockquote data-quote="Decipha" data-source="post: 936127" data-attributes="member: 560051">i believe you have to run a wire from the battery (could use distribution block) to the + on the power terminal for the lights, then run your ground from the - on the power terminal to a clean metal surface of your car, make sure you bolt it down nice and tight, then connect a wire from the rem+ on your amp to the rem+ on the power terminal of the light, if the power terminal for the light only has 2 connections (+ and -) then you are going to need a relay or you can connect it to a switch to manually turn it on and offI have seen some people connect the lights for their subs to there trunk button so when the trunk pops open the lights come on</blockquote>

Top