Reply to thread

Message: <blockquote data-quote="Slody4Futbol" data-source="post: 694627" data-attributes="member: 551839"><p>u'll have 2 learn 2 get a meter and figure out how 2 wire them all 2 the new headunit from the amp in the back... i think there's a blue set of wires... and a yellow set... one is for the right side and the other is for the left... when i do them i do the one in the kick **4 ohms** and the other front 4 ohm speaker for the front channel on that side in series for 8 ohms... and i wire the other three on that side for a final 4 ohm load... i think it's 2 6 ohms and a 4... or 2 4 ohms and a 6... who knows... series and parallel... it's weird but it works everytime i do it... then i copy it for the other side... the stripes are all the same for hte most part... once u get one side just copy ur wires for the other set and ur ready 2 go... then run wires all the way 2 the front to the headunit</p></blockquote><p></p>

Top