Reply to thread

Message

<blockquote data-quote="dimedragger88" data-source="post: 7198371" data-attributes="member: 630152">Ok I just got 2 RE SE10s and I&#039;m about to order a power acoustik bamf 5500D mono amp. The problem is that I&#039;m putting this in a body dropped ext cab 87 s10 and I&#039;m 6&#039;2&quot; so I have to keep leg room. The way the seat is now its comfortable. So the room I have is 44&quot; wide and 11&quot; deep from seat edge to back wall. So as for the box I&#039;m trying to get good deep bass out of it so I found a box calculator on the12volt.com and come up with these specs for a dual chambered box:44&quot; wide20&quot; tall12&quot; deep (leaning the seat forward a drop)3/4&quot; mdf2 ports:1.5&quot; wide10.5&quot; tall14.75&quot; longAnd I came up with that giving about 4.5 cu. ft. total so 2.25 for each sub then about 2 after displacement for the port and sub. And it said this would give me between 33 to 34 hz.Ok for the actual questions:1. Do those specs seem accurate?2. Will this give me the low hard hitting bass I&#039;m looking for?3. Will this work ok with these subs and amp?Sorry for all the questions and info but I just want to make sure I build this right so it sounds good and don&#039;t blow anything. Thanks for any help.</blockquote>

[QUOTE="dimedragger88, post: 7198371, member: 630152"] Ok I just got 2 RE SE10s and I'm about to order a power acoustik bamf 5500D mono amp. The problem is that I'm putting this in a body dropped ext cab 87 s10 and I'm 6'2" so I have to keep leg room. The way the seat is now its comfortable. So the room I have is 44" wide and 11" deep from seat edge to back wall. So as for the box I'm trying to get good deep bass out of it so I found a box calculator on the12volt.com and come up with these specs for a dual chambered box: 44" wide 20" tall 12" deep (leaning the seat forward a drop) 3/4" mdf 2 ports: 1.5" wide 10.5" tall 14.75" long And I came up with that giving about 4.5 cu. ft. total so 2.25 for each sub then about 2 after displacement for the port and sub. And it said this would give me between 33 to 34 hz. Ok for the actual questions: 1. Do those specs seem accurate? 2. Will this give me the low hard hitting bass I'm looking for? 3. Will this work ok with these subs and amp? Sorry for all the questions and info but I just want to make sure I build this right so it sounds good and don't blow anything. Thanks for any help. [/QUOTE]

Verification