Reply to thread

Message

<blockquote data-quote="toofukinloud" data-source="post: 569461" data-attributes="member: 557147"><p>Welllll, I promised the 12&#039;s to a buddy of mine. I did the cartoys thing and bought 2 for 800 a piece and bought the system warranty for them. My buddy is buying them both from me for 1000 for the pair and he will just use my name if anything happens to the subs. I don&#039;t know if you read the whole thread but I bought another 1000/1 and am getting 3 13&#039;s in a vented box in the bed. Now I just have to figure out how the hell I am going to get these to fit and still look right. As of now I did some playing around and with the blowthrough I have 16.75&quot; from the floor tho the plastic piece under the window. The sub takes up 14 of that and another .75 for the bottom piece of MDF. Now that leaves me with exactly 2 inches. Now I need to add in the 2 inch vent. You see my problem. Everything will be touching.. the subs to the top of the blowthrough and the top of the vent. I really wanted the subs to be flush with the blowthrough but it looks like I will have to angle the box&nbsp; some so I can fit the sub and the vent in there and it still look clean. Any Ideas. I know I could angle the two outside subs and move the middle back but I worry about the cancellation of the two outside subs being slightly angled toward eachother.</p></blockquote><p></p>

[QUOTE="toofukinloud, post: 569461, member: 557147"] Welllll, I promised the 12's to a buddy of mine. I did the cartoys thing and bought 2 for 800 a piece and bought the system warranty for them. My buddy is buying them both from me for 1000 for the pair and he will just use my name if anything happens to the subs. I don't know if you read the whole thread but I bought another 1000/1 and am getting 3 13's in a vented box in the bed. Now I just have to figure out how the hell I am going to get these to fit and still look right. As of now I did some playing around and with the blowthrough I have 16.75" from the floor tho the plastic piece under the window. The sub takes up 14 of that and another .75 for the bottom piece of MDF. Now that leaves me with exactly 2 inches. Now I need to add in the 2 inch vent. You see my problem. Everything will be touching.. the subs to the top of the blowthrough and the top of the vent. I really wanted the subs to be flush with the blowthrough but it looks like I will have to angle the box some so I can fit the sub and the vent in there and it still look clean. Any Ideas. I know I could angle the two outside subs and move the middle back but I worry about the cancellation of the two outside subs being slightly angled toward eachother. [/QUOTE]

Verification