Reply to thread

Message

<blockquote data-quote="scoobygsx" data-source="post: 7247513" data-attributes="member: 631117">Upgrading my Charger&#039;s system..Here&#039;s what I&#039;m going to run.(Sorry, new guy so the forum&#039;s limiting how many URLs I can post, otherwise I would post all the links)Headunit - Pioneer-AVIC-Z120BTFront door components - Alpine-SPR-13SRear 6x9&#039;s - Alpine SPR-69CFree-air sub in the stock location - Pioneer-TS-SW841DNow with that..I don&#039;t know which amp to get. I&#039;m thinking a 4-channel. Have each front door (components) on one channel, then have the sub bridged on the other 2 channels? Then have the rear speakers powered by the HU? The HU only puts out 14 watts continuous RMS..50 watts peak.I also don&#039;t know which RMS I need..all speakers are 4 ohm impedence, the sub&#039;s peak handling power is 500w, the components &amp;amp; rear 6x9&#039;s are 300w peak handling power. So with all that info..which specs should I be looking for in an amp?It&#039;s also an &#039;06 Dodge Charger with the stock (horrible) Boston Acoustics 6-speaker system...dunno if that helps out or not.&amp;amp; Please no comments about how I should go with a bigger sub in a custom-made enclosed box...I&#039;m not huge on bass. I listen to mostly alternative &amp;amp; rock with occasional rap. I like my bass clear &amp;amp; punchy..not boomy.Thanks!!</blockquote>

[QUOTE="scoobygsx, post: 7247513, member: 631117"] Upgrading my Charger's system..Here's what I'm going to run. (Sorry, new guy so the forum's limiting how many URLs I can post, otherwise I would post all the links) Headunit - Pioneer-AVIC-Z120BT Front door components - Alpine-SPR-13S Rear 6x9's - Alpine SPR-69C Free-air sub in the stock location - Pioneer-TS-SW841D Now with that..I don't know which amp to get. I'm thinking a 4-channel. Have each front door (components) on one channel, then have the sub bridged on the other 2 channels? Then have the rear speakers powered by the HU? The HU only puts out 14 watts continuous RMS..50 watts peak. I also don't know which RMS I need..all speakers are 4 ohm impedence, the sub's peak handling power is 500w, the components & rear 6x9's are 300w peak handling power. So with all that info..which specs should I be looking for in an amp? It's also an '06 Dodge Charger with the stock (horrible) Boston Acoustics 6-speaker system...dunno if that helps out or not. & Please no comments about how I should go with a bigger sub in a custom-made enclosed box...I'm not huge on bass. I listen to mostly alternative & rock with occasional rap. I like my bass clear & punchy..not boomy. Thanks!! [/QUOTE]

Verification